A Sub-6 GHz MIMO Antenna Array for 5G Wireless Terminals

被引:37
作者
Khan, Jalal [1 ]
Ullah, Sadiq [1 ]
Tahir, Farooq A. [2 ]
Tubbal, Faisel [3 ,4 ]
Raad, Raad [3 ]
机构
[1] Univ Engn & Technol, Telecommun Engn Dept, Mardan 23200, Pakistan
[2] Natl Univ Sci & Technol NUST, Res Inst Microwave & Millimeter Wave Studies RIMM, Islamabad 44000, Pakistan
[3] Univ Wollongong, Sch Elect Comp & Telecommun Engn, Wollongong, NSW 2522, Australia
[4] Libyan Ctr Remote Sensing & Space Sci, Technol Projects Dept, Tripoli 21218, Libya
关键词
5G; antenna array; CST; sub-6; GHz; MIMO; SAR; DESIGN;
D O I
10.3390/electronics10243062
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents a novel antenna with its array and MIMO configuration for the 5G sub-6 GHz applications. The proposed antenna element operates at the central frequency of 5.57 GHz dedicated for Sub-6 GHz 5G communication applications. The antenna element holds a circular-shaped radiating portion with an inner-circular slot, plus a rectangular slot at its right edge to make the proposed design resonate at the desired frequency band. The RT5880 substrate is used with a thickness of 0.787 mm, and the low-loss tangent of 0.0009. To achieve a desired gain of 12 dB, a four-element array configuration is adopted, which improved a bore side gain to 12.4 dB from 6.66 dB. Then, the two-port configuration is adopted such that the isolation achieved between them is more than -30 dB. The total efficiency of the proposed antenna array is observed to be more than 80% within the operating bandwidth. Moreover, the Specific Absorption Rate (SAR) analysis is also presented for the proposed MIMO configuration, obeying the standard value (i.e., <2 W/kg for any 10 g of tissue). The measured results are in good agreement with the simulated results. All the simulations of the proposed design are performed in the CST MWS software.
引用
收藏
页数:15
相关论文
共 27 条
[1]  
[Anonymous], 2016, IEEE 10 EUROPEAN C A
[2]  
Ballanis C.A., 2016, Antenna theory analysis and design
[3]  
Barreto A. N., 2016, Journal of Communication and Information Systems, V31, P146, DOI [10.14209/jcis.2016.14, DOI 10.14209/JCIS.2016.14]
[4]   Wideband MIMO Antenna Array Covering 3.37.1 GHz for 5G Metal-Rimmed Smartphone Applications [J].
Cai, Qinyi ;
Li, Yixin ;
Zhang, Xugang ;
Shen, Wenhui .
IEEE ACCESS, 2019, 7 (142070-142084) :142070-142084
[5]   Broadband Eight-Antenna Array Design for Sub-6 GHz 5G NR Bands Metal-Frame Smartphone Applications [J].
Chen, Horng-Dean ;
Tsai, Yuan-Chung ;
Sim, Chow-Yen-Desmond ;
Kuo, Colin .
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2020, 19 (07) :1078-1082
[6]   Circularly Polarized Pattern Reconfigurable Flexible Antenna for 5G-sub-6-GHz Applications [J].
Ghaffar, Adnan ;
Li, Xue Jun ;
Ahmad, Tanveer ;
Hussain, Niamat ;
Alibakhshikenari, Mohammad ;
Limiti, Ernesto .
2020 IEEE ASIA-PACIFIC MICROWAVE CONFERENCE (APMC), 2020, :625-627
[7]   Side-Edge Frame Printed Eight-Port Dual-Band Antenna Array for 5G Smartphone Applications [J].
Guo, Jingli ;
Cui, Lun ;
Li, Cheng ;
Sun, Baohua .
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2018, 66 (12) :7412-7417
[8]   A Wideband Kanji Patch Antenna for 5G Sub-6-GHz Applications [J].
Jiang, Jianfeng ;
Li, Yingsong .
2020 13TH UK-EUROPE-CHINA WORKSHOP ON MILLIMETRE-WAVES AND TERAHERTZ TECHNOLOGIES (UCMMT2020), 2020,
[9]   A Dual-Band MIMO Antenna With Enhanced Isolation for 5G Smartphone Applications [J].
Jiang, Wen ;
Cui, Yangqiang ;
Liu, Bo ;
Hu, Wei ;
Xi, Yan .
IEEE ACCESS, 2019, 7 :112554-112563
[10]   Design and Performance Comparison of Rotated Y-Shaped Antenna Using Different Metamaterial Surfaces for 5G Mobile Devices [J].
Khan, Jalal ;
Sehrai, Daniyal Ali ;
Khan, Mushtaq Ahmad ;
Khan, Haseeb Ahmad ;
Ahmed, Salman ;
Ali, Arslan ;
Arif, Arslan ;
Memon, Anwer Ahmad ;
Khan, Sahib .
CMC-COMPUTERS MATERIALS & CONTINUA, 2019, 60 (02) :409-420