Multi-range sensors for the measurement of liquid film thickness distributions based on electrical conductance

The paper presents an approach toward an enhancement of the measuring range of high-speed sensors for the measurement of liquid film thickness distributions based on electrical conductance. This type of sensors consists of electrodes mounted flush to the wall. The sampling of the current generated between a pair of neighboring electrode is used as a measure of the film thickness. Such sensors have a limited measuring range, which is proportional to the lateral distance between the electrodes. The range is therefore coupled to the spatial resolution. The proposed new design allows an extension of the film thickness range by combining electrode matrices of different resolution in one and the same sensor. In this way, a high spatial resolution is reached with a small thickness range, whereas a film thickness that exceeds the range of the high resolution measurement can still be acquired even though on the costs of a lower spatial resolution. A simultaneous signal acquisition with a sampling frequency of 32 kHz combines three measuring ranges for the characterization of a two-dimensional film thickness distribution: (I) thickness range 0-600 mu m, lateral resolution 2 x 2 mm(2), (2) thickness range 400-1300 mu m, lateral resolution 4 x 4 mm(2), and (3) thickness range 1000-3500 mu m, lateral resolution 12 x 12 mm(2). The functionality of this concept sensor is demonstrated by tests in a horizontal wavy stratified air-water flow at ambient conditions. Using flexible printed circuit board technology to manufacture the sensor makes it possible to place the sensor at the inner surface of a circular pipe. (C) 2014 Elsevier Ltd. All rights reserved.