A method to distinguish harmonic frequencies and remove the harmonic effect in operational modal analysis of rotating structures

Operational modal analysis (OMA) is used to identify the modal parameters of a structure under operational conditions, which reflects the real boundary conditions and state-dependent parameters. For rotating structures under operational conditions, in addition to broadband excitations, the harmonic excitation is also present and even dominates the responses in some cases. Since only the responses are recorded in OMA, the first prob-lem lies in separating the resonant frequencies from the harmonic excitation frequencies. Moreover, if the frequency of the harmonic excitation is close to, or coincides with a reso-nant frequency of the system, classical modal analysis procedures will fail to identify the modal parameters accurately. These issues are addressed in this paper and a method is pre-sented for distinguishing harmonic frequencies and removing the harmonic effect using correlation functions of the responses. Firstly, the correlation functions are deduced for the system under the combination of broadband and harmonic excitations, yielding the sum of free decay response of the system and sinusoids with the same frequencies as the harmonic excitations. Then, the principle of the method is presented using a numerical study on a two degree-of-freedom system. Both the noise resistance and method compar-ison studies are conducted in the simulation case. Subsequently, the effectiveness of the method is demonstrated through experiments on a light-damped beam, where cases of dif-ferent harmonic intensity and different harmonic frequencies are considered. Lastly, the proposed method is applied to a rotating blade to extract modal parameters in its opera-tional state. (c) 2021 Elsevier Ltd. All rights reserved.