On the use of gamma irradiation crosslinked PVA membranes in hydrogen fuel cells

被引:33
作者
Nikolic, Vladimir M. [1 ]
Krkljes, Aleksandra [2 ]
Popovic, Zorica Kacarevic [2 ]
Lausevic, Zoran V. [2 ]
Miljanic, Scepan S. [3 ]
机构
[1] Inst Gen & Phys Chem, Belgrade 11000, Serbia
[2] Vinca Inst Nucl Sci, Belgrade 11001, Serbia
[3] Univ Belgrade, Fac Phys Chem, Belgrade 11001, Serbia
关键词
PVA membrane; gamma irradiation; fuel cell;
D O I
10.1016/j.elecom.2007.08.022
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
There is growing interest in the use of fuel cells (FC) with hydrogen as the main fuel for stationary, mobile, and transportation applications. In the FC concept membranes play increasingly important roles. Polymer electrolyte membrane fuel cells (PEMFCs) are considered as the most promising fuel cell technology for a wide range of applications due to the stable operation, the high energy generation yield and the simplicity of the system. In this work, we develop different types of membranes based on poly(vinyl alcohol) (PVA). PVA is a water-soluble polymer that is used in practical applications because of its easy preparation, excellent chemical resistance, thermal and mechanical properties. Crosslinking of the PVA was performed by gamma irradiation since radiation chemistry is found to be a very effective method for constructing three-dimensional polymeric networks. The samples prepared in this way were then immersed in the alkaline solution over a certain period of time to turn them into conductive membranes. Ionic conductivity of the PVA hydrogels, was then measured as a function of concentration of KOH solutions and temperature. Cyclic voltammetry of these PVA hydrogel electrolytes was performed to determine the width of the electrochemical stability window. We examined these membranes impregnated with saturated 6 M KOH electrolyte as polymer membrane for fuel cells application. Our experiments showed that PEMFCs with PVA and Nafion(R) membranes had similar polarization curves, under same conditions. Furthermore, PVA membranes proved to be stable during the real cell tests. This study offers a possibility for more earnest approach to the use of PVA membranes for fuel cell applications. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:2661 / 2665
页数:5
相关论文
共 12 条
[1]   A simple model for solid polymer electrolyte (SPE) water electrolysis [J].
Choi, PH ;
Bessarabov, DG ;
Datta, R .
SOLID STATE IONICS, 2004, 175 (1-4) :535-539
[2]   Fuel cell materials and components [J].
Haile, SM .
ACTA MATERIALIA, 2003, 51 (19) :5981-6000
[3]   Charge-discharge characteristics of nickel/zinc battery with polymer hydrogel electrolyte [J].
Iwakura, C ;
Murakami, H ;
Nohara, S ;
Furukawa, N ;
Inoue, H .
JOURNAL OF POWER SOURCES, 2005, 152 (01) :291-294
[4]   Fabrication of Ag-PVA hydrogel nanocomposite by γ-irradiation [J].
Krkljes, A. ;
Nedeljkovic, J. M. ;
Kacarevic-Popovic, Z. M. .
POLYMER BULLETIN, 2007, 58 (01) :271-279
[5]  
LASSEGUES JC, 1992, PROTON CONDUCTORS SO, P311
[6]   Novel poly(vinyl alcohol)-KOH-H2O alkaline polymer electrolyte [J].
Lewandowski, A ;
Skorupska, K ;
Malinska, J .
SOLID STATE IONICS, 2000, 133 (3-4) :265-271
[7]   Use of radiation in the production of hydrogels [J].
Lugao, AB ;
Malmonge, SM .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2001, 185 (1-4) :37-42
[8]   Thermal and transport properties of the polymer electrolyte based on poly(vinyl alcohol)-KOH-H2O [J].
Palacios, I ;
Castillo, R ;
Vargas, RA .
ELECTROCHIMICA ACTA, 2003, 48 (14-16) :2195-2199
[9]   Biocompatible and bioadhesive hydrogels based on 2-hydroxyethyl methacrylate, monofunctional poly(alkylene glycol)s and itaconic acid [J].
Tomic, Simonida Lj. ;
Suljovrujic, Edin H. ;
Filipovic, Jovanka M. .
POLYMER BULLETIN, 2006, 57 (05) :691-702
[10]  
VONSONNTAG C, 2006, FREE RADICAL INDUCED, P200