Tailoring modulus and hardness of in-situ formed β-Ti in bulk metallic glass composites by precipitation of isothermal ω-Ti

被引:33
作者
Zhang, L. [1 ]
Chen, S. [1 ]
Fu, H. M. [1 ]
Li, H. [1 ]
Zhu, Z. W. [1 ]
Zhang, H. W. [1 ]
Li, Z. K. [1 ]
Wang, A. M. [1 ]
Zhang, H. F. [1 ]
机构
[1] Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
Bulk metallic glass composite; Plasticity; omega-Ti; Modulus; Hardness; WORK-HARDENING BEHAVIOR; MATRIX COMPOSITES; MECHANICAL-PROPERTIES; TENSILE DUCTILITY; SHEAR-BAND; PLASTIC-DEFORMATION; FORMING ABILITY; PHASE; TITANIUM; TRANSFORMATION;
D O I
10.1016/j.matdes.2017.07.062
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
It is challenging to tailor the mechanical properties of in-situ formed beta phases in Ti/Zr-based bulk metallic glass composites (beta-type BMGCs) without changing the morphologies of the beta phases. Recently, BMGCs containing metastable beta-Ti/Zr phases (metastable beta-type BMGCs) exhibit an exothermic reaction below the glass transition temperature (sub-T-g) of the glassy matrices during heating, however, the corresponding structural origin remains unclear. In this work, the precipitation of. phase inside beta phase was revealed to account for the sub-T-g exothermic event of the metastable Ti45.7Zr33Cu5.8Co3Be12.5 BMGC. The sub-T-g annealing of metastable beta-type BMGCs causes the precipitation of nanometer-sized isothermal. phase, which leads to a large increase in the modulus and hardness of the crystalline phase. This finding provides a novel route to tailor the modulus and hardness of the crystalline phases in BMGCs without changing their morphologies, including volume fractions, sizes, and distributions. On this basis, the influence of the modulus and hardness of the crystalline phase on mechanical properties of BMGCs was exclusively investigated. Our experimental results together with finite-element simulations proved that lower modulus and hardness of the crystalline phase benefit a larger plasticity of BMGCs. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:82 / 90
页数:9
相关论文
共 51 条
[1]  
Bai J., 2016, SCI REP, V6
[2]   Perspectives on Titanium Science and Technology [J].
Banerjee, Dipankar ;
Williams, J. C. .
ACTA MATERIALIA, 2013, 61 (03) :844-879
[3]   Omega phase transformation - morphologies and mechanisms [J].
Banerjee, S. ;
Tewari, R. ;
Dey, G. K. .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2006, 97 (07) :963-977
[4]   Quasi-static and dynamic deformation behaviors of an in-situ Ti-based metallic glass matrix composite [J].
Chu, M. Y. ;
Jiao, Z. M. ;
Wu, R. F. ;
Wang, Z. H. ;
Yang, H. J. ;
Wang, Y. S. ;
Qiao, J. W. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 640 :305-310
[5]   Synthesis and characterization of Zr-based in situ crystal precipitated and liquid phase separated bulk metallic glass composite [J].
Czel, Gyorgy ;
Tomolya, Kinga ;
Sveda, Maria ;
Sycheva, Anna ;
Kristaly, Ferenc ;
Roosz, Andras ;
Janovszky, Dora .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2017, 458 :41-51
[6]   Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys [J].
Devaraj, A. ;
Nag, S. ;
Srinivasan, R. ;
Williams, R. E. A. ;
Banerjee, S. ;
Banerjee, R. ;
Fraser, H. L. .
ACTA MATERIALIA, 2012, 60 (02) :596-609
[7]   Review on the Research and Development of Ti-Based Bulk Metallic Glasses [J].
Gong, Pan ;
Deng, Lei ;
Jin, Junsong ;
Wang, Sibo ;
Wang, Xinyun ;
Yao, Kefu .
METALS, 2016, 6 (11)
[8]   Shear bands in metallic glasses [J].
Greer, A. L. ;
Cheng, Y. Q. ;
Ma, E. .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2013, 74 (04) :71-132
[9]   Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions [J].
Hays, CC ;
Kim, CP ;
Johnson, WL .
PHYSICAL REVIEW LETTERS, 2000, 84 (13) :2901-2904
[10]   FORMATION OF OMEGA PHASE IN TITANIUM AND ZIRCONIUM ALLOYS - A REVIEW [J].
HICKMAN, BS .
JOURNAL OF MATERIALS SCIENCE, 1969, 4 (06) :554-&