Sub-nm accuracy metrology for ultra-precise reflective X-ray optics

被引：36

作者：

Siewert, F. ^{[1
]}

Buchheim, J. ^{[1
]}

Zeschke, T. ^{[1
]}

Brenner, G. ^{[2
]}

Kapitzki, S. ^{[2
]}

Tiedtke, K. ^{[2
]}

机构：

[1] Helmholtz Zentrum Berlin BESSY II, D-12489 Berlin, Germany

[2] DESY, D-22607 Hamburg, Germany

来源：

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT | 2011年 / 635卷

关键词：

X-ray optics; FEL; Synchrotron radiation; Metrology; NOM; LTP; FLASH;

D O I：

10.1016/j.nima.2010.10.137

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The transport and monochromatization of synchrotron light from a high brilliant laser-like source to the experimental station without significant loss of brilliance and coherence is a challenging task in X-ray optics and requires optical elements of utmost accuracy. These are wave-front preserving plane mirrors with lengths of up to 1 m characterized by residual slope errors in the range of 0.05 mu rad (rms) and values of 0.1 nm (rms) for micro-roughness. In the case of focusing optical elements like elliptical cylinders the required residual slope error is in the range of 0.25 mu rad rms and better. In addition the alignment of optical elements is a critical and beamline performance limiting topic. Thus the characterization of ultra-precise reflective optical elements for FEL-beamline application in the free and mounted states is of significant importance. We will discuss recent results in the field of metrology achieved at the BESSY-II Optics Laboratory (BOL) of the Helmholtz Zentrum Berlin (HZB) by use of the Nanometer Optical Component Measuring Machine (NOM). Different types of mirror have been inspected by line-scan and slope mapping in the free and mounted states. Based on these results the mirror clamping of a combined mirror/grating set-up for the BL-beamlines at FLASH was improved. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：S52 / S57

页数：6

共 37 条

[1]

Altarelli M., 2006, The European X-Ray Free-Electron Laser Technical Design Report

[2]

Debler E., 1979, PTB MITTEILUNGEN FOR, P339

[3]

Ehret G., 2009, FRINGE 2009, P318

[4] Autocollimators for deflectometry: Current status and future progress [J].

Geckeler, Ralf D. ;

Just, Andreas ;

Krause, Michael ;

Yashchuk, Valeriy V. .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2010, 616 (2-3) :140-146

[5] Sub-nm topography measurement by deflectometry:: Flatness standard and wafer nanotopography [J].

Geckeler, RD ;

Weingärtner, I .

ADVANCED CHARACTERIZATION TECHNIQUES FOR OPTICAL, SEMICONDUCTOR, AND DATA STORAGE COMPONENTS, 2002, 4779 :1-12

[6]

GUBAREV M, 2001, P SPIE, V4451

[7]

Illemann J, 2004, AIP CONF PROC, V705, P843, DOI 10.1063/1.1757927

[8] IMPROVED MEASUREMENT ACCURACY IN A LONG TRACE PROFILER - COMPENSATION FOR LASER POINTING INSTABILITY [J].

IRIC, SC .

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1994, 347 (1-3) :226-230

[9]

IRICK SC, 1992, REV SCI INSTRUM, V63

[10] The holography endstation of beamline P10 at PETRA III [J].

Kalbfleisch, S. ;

Osterhoff, M. ;

Giewekemeyer, K. ;

Neubauer, H. ;

Krueger, S. P. ;

Hartmann, B. ;

Bartels, M. ;

Sprung, M. ;

Leupold, O. ;

Siewert, F. ;

Salditt, T. .

SRI 2009: THE 10TH INTERNATIONAL CONFERENCE ON SYNCHROTRON RADIATION INSTRUMENTATION, 2010, 1234 :433-+

← 1 2 3 4 →