The effect of seismic loading on the fatigue strength of welded joints

被引:9
作者
Kondo, Y. [1 ]
Okuya, K.
机构
[1] Kyushu Univ, Dept Intelligent Machinery & Syst, Fukuoka 8190395, Japan
[2] Kyushu Polytech Coll, Dept Residential & Architectural Syst Engn, Fukuoka 8020985, Japan
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 468卷
关键词
welded joints; seismic loading; large strain cycling; earthquake; fatigue strength; fatigue limit;
D O I
10.1016/j.msea.2006.07.170
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Earthquakes sometimes damage steel structures. Structures which are not seriously damaged are still used after earthquakes but their fatigue strength may have been reduced by the large cyclic loadings imposed by the earthquakes. In order to clarify the effect of seismic loading on the fatigue strength of welded joints, high cycle fatigue and variable amplitude fatigue tests after a number of large initial strain cycles were performed. The large strain cycles formed a short crack at the toe of the weld in a low cycle fatigue that triggered a high cycle fatigue strength reduction. The high cycle fatigue limit of welded joints after initial strain cycles is governed by the threshold stress intensity factor of the short crack. The formation of short cracks also enhanced the damage accumulation for subsequent variable amplitude loading. It is important to keep all of the stress variations after earthquake below the fatigue limit of the cracked welded joints to avoid fatigue damage accumulation after an earthquake. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:223 / 229
页数:7
相关论文
共 13 条
[1]  
BOETTNER RC, 1965, T METALL SOC AIME, V233, P379
[2]  
Dowling NE, 1976, Cracks and fracture, P19
[3]  
Endo T, 1974, P 1974 S MECH BEH MA, V1, P371
[4]  
HAIBACH E, 1970, P FATIGUE WELDED STR, V6, P328
[5]  
*JAP SOC STEEL CON, 2001, FAT DES POINT STEEL, P5
[6]  
Jono M., 1983, Journal of the Society of Materials Science, Japan, V32, P1137, DOI 10.2472/jsms.32.1137
[7]  
Kashiwagi M., 2003, Journal of the Society of Materials Science, Japan, V52, P1345, DOI 10.2472/jsms.52.1345
[8]  
KIKUKAWA M, 1980, ADV FRACTURE RES, P1799
[9]   Cause and effect of factors affecting the ΔKth of small crack [J].
Kondo, Y .
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE IV, 2005, 482 :89-94
[10]   The effect of material hardness and mean stress on the fatigue limit of steels containing small defects [J].
Kondo, Y ;
Sakae, C ;
Kubota, M ;
Kudou, T .
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2003, 26 (08) :675-682