Influence of braze type on microstructure and mechanical behavior of WC-Co/steel dissimilar joints

被引：26
作者：
Amelzadeh, Mohammadreza [1 ]
Mirsalehi, Seyyed Ehsan [1 ]
机构：
[1] Amirkabir Univ Technol, Dept Min & Met Engn, Tehran, Iran
来源：
JOURNAL OF MANUFACTURING PROCESSES | 2018年 / 36卷
关键词：
Brazing; Cemented carbide; Filler alloy; Mechanical behavior; Microstructure; Steel; CEMENTED CARBIDE; TEMPERATURE; WETTABILITY; DIFFUSION; INTERFACE; STRENGTH; STRESS; TIME; CO;
D O I：
10.1016/j.jmapro.2018.10.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study aims to investigate the influence of different brazing filler alloys on WC-Co/steel joint characteristics. For this purpose, the microstructure and mechanical behavior of the joints were examined. The Cu-Zn-Ni filler alloy produced an alpha + beta microstructure with the highest hardness and shear strength of about 344 MPa. However, the Cu-Zn, BAg-27 and BAg-2a filler alloys had the lowest shear strength of about 203, 177 and 102 MPa, respectively. The microhardness of all the brazed joints near the cemented carbide boundary was greater than that measured near the steel boundary and the middle of the brazing alloy. As a consequence, it was found that the presence of Ni element on the filler alloy can promote the hardness and strength of the joints. The present work provided insight into understanding the microstructure-strength relationship in WC-Co/steel brazing joints, and revealed that choosing proper filler alloys is very effective for improving the joint performance.
引用
收藏
页码：450 / 458
页数：9
相关论文
共 50 条
[31]   Oxidation behavior of WC-Co [J].
Basu, SN ;
Sarin, VK .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 209 (1-2) :206-212
[32]   Effects of Cr3C2 on the microstructure and mechanical properties of the brazed joints between WC-Co and carbon steel [J].
Lee, WB ;
Kwon, BD ;
Jung, SB .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2006, 24 (03) :215-221
[33]   Investigation on diffusion bonding of functionally graded WC-Co/Ni composite and stainless steel [J].
Feng, Keqin ;
Chen, Hongsheng ;
Xiong, Ji ;
Guo, Zhixing .
MATERIALS & DESIGN, 2013, 46 :622-626
[34]   Oxidation behavior of WC-Co cemented carbide in elevated temperature [J].
Shoufa, Liu .
MATERIALS RESEARCH EXPRESS, 2018, 5 (09)
[35]   Brazing of WC-8Co cemented carbide to steel using Cu-Ni-Al alloys as filler metal: Microstructures and joint mechanical behavior [J].
Zhang, Xiangzhao ;
Liu, Guiwu ;
Tao, Junnan ;
Guo, Yajie ;
Wang, Jingjing ;
Qiao, Guanjun .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (07) :1180-1188
[36]   Effect of Crystallinity of WC on Microstructure, Properties, and Application of WC-Co Cemented Carbide [J].
Xiang, Zhongnan ;
Li, Zhanjiang ;
Nie, Hongbo ;
Chang, Fa ;
Dai, Pinqiang .
JOURNAL OF SUPERHARD MATERIALS, 2021, 43 (01) :21-30
[37]   Effect of Crystallinity of WC on Microstructure, Properties, and Application of WC-Co Cemented Carbide [J].
Zhanjiang Zhongnan Xiang ;
Hongbo Li ;
Fa Nie ;
Pinqiang Chang .
Journal of Superhard Materials, 2021, 43 :21-30
[38]   Microstructure and mechanical behavior in dissimilar 13Cr/2205 stainless steel welded pipes [J].
Bettahar, K. ;
Bouabdallah, M. ;
Badji, R. ;
Gaceb, M. ;
Kahloun, C. ;
Bacroix, B. .
MATERIALS & DESIGN, 2015, 85 :221-229
[39]   The Influence of Flash Welding Parameters on the Microstructure and Mechanical Performance of Dissimilar Steel Welded Joints [J].
Jia, Xin ;
Wang, Lin ;
Ma, Zhenduo ;
Yang, Zhiwei ;
Xu, Jianping ;
Wang, Junjie .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (11) :9845-9854
[40]   Influence of Micron WC Addition on the Microstructure and Mechanical Properties of Ultrafine WC-Co Cemented Carbides at the Elevated Temperature [J].
Liu, C. ;
Lin, N. ;
He, Y. H. ;
Liu, W. S. ;
Ma, Y. Z. .
JOURNAL OF SUPERHARD MATERIALS, 2018, 40 (01) :40-46
12345