CONTRACTION OF RADIATOR LENGTH IN HEAVY VEHICLES USING CERIUM OXIDE NANOFLUID BY ENHANCING HEAT TRANSFER PERFORMANCE

被引:2
|
作者
Ramalingam, Senthil [1 ]
Dhairiyasamy, Ratchagaraja [1 ]
Rajendran, Silambarasan [1 ]
Radhakrishnan, Manikandan [1 ]
机构
[1] Univ Coll Engn Villupuram, Dept Mech Engn, Villupuram, Tamil Nadu, India
来源
THERMAL SCIENCE | 2016年 / 20卷
关键词
ceria nanoparticles; ethylene glycol; nanofluid; viscosity; heat transfer performance introduction; CAR RADIATOR; TRANSFER ENHANCEMENT; TRANSFER COEFFICIENT; AUTOMOBILE RADIATOR; WATER NANOFLUIDS; EXCHANGER; COOLANT; FLOW;
D O I
10.2298/TSCI16S4037R
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this present investigation, heat transfer performance of CeO2-ethylene glycol as coolants in heat pipes are analyzed. Various concentrations of 0.5, 0.75, 1.0, 1.25, 1.5, and 2.0 vol. % with different volumetric flow 1.0, 2.0, 3.0, 3.5, and 4.0 1pm at a temperature of 40 degrees C, are investigated experimentally and the results are numerically analyzed by means of cross tube heat exchanger and horizontal flow with twist plate insert. The results are scrutinized to evaluate the best concentration which will reduce the size of the existing radiator length. The results demonstrated that, for 0.75 vol.% combination of CeO2-ethylene glycol resulted in increase of heat transfer coefficient compared to the combination of water-ethylene glycol. Increase in volumetric flow rate of the coolant increase the heat transfer coefficient results in the contraction of radiator length. Replacing the original coolant with the proposed combination, it is estimated that the size of the radiator, inventory of the fluid, and pumping power is reduced, thus, making this nanofluid an energy efficient fluid for the engine cooling system.
引用
收藏
页码:S1037 / S1044
页数:8
相关论文
共 50 条
  • [21] Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid
    Kumar, Vikas
    Tiwari, Arun Kumar
    Ghosh, Subrata Kumar
    ENERGY CONVERSION AND MANAGEMENT, 2016, 118 : 142 - 154
  • [22] Feasibility review of using copper oxide nanofluid to improve heat transfer in the double-tube heat exchanger
    Kadhim, Saif Ali
    Hammoodi, Karrar A.
    Askar, Ali Habeeb
    Rashid, Farhan Lafta
    Wahhab, Hasanain A. Abdul
    RESULTS IN ENGINEERING, 2024, 24
  • [23] Modeling of heat transfer performance of carbon nanotube nanofluid in a tube with fixed wall temperature by using ANN-GA
    Nasirzadehroshenin, Fatemeh
    Sadeghzadeh, Milad
    Khadang, Amirhossein
    Maddah, Heydar
    Ahmadi, Mohammad Hossein
    Sakhaeinia, Hossein
    Chen, Lingen
    EUROPEAN PHYSICAL JOURNAL PLUS, 2020, 135 (02)
  • [24] Heat transfer augmentation in automobile radiator using Al2O3-water based nanofluid
    Chaurasia, Prabhat
    Kumar, Anil
    Yadav, Anshul
    Rai, Praveen Kumar
    Kumar, Virendra
    Prasad, Lalta
    SN APPLIED SCIENCES, 2019, 1 (03):
  • [25] State of art on the role of using a nanofluid in enhancing heat transfer in microchannels with different geometries
    Elfatah, Mahmoud G. Abd
    Abd-Ellatif, Osama E.
    Attia, Ahmed A. A.
    Elnady, Abdelrady O.
    Journal of Engineering and Applied Science, 2024, 71 (01):
  • [26] Thermal performance enhancement studies using graphite nanofluid for heat transfer applications
    Sankar, P. R. Jyothi
    Venkatachalapathy, S.
    Asirvatham, Lazarus G.
    HEAT TRANSFER, 2020, 49 (05) : 3013 - 3029
  • [27] On Heat Transfer Performance of Cooling Systems Using Nanofluid for Electric Motor Applications
    Zadeh, Ali Deris
    de Monte, Filippo
    ENTROPY, 2020, 22 (01) : 99
  • [28] Heat Transfer Performance of a Glass Thermosyphon Using Graphene-Acetone Nanofluid
    Asirvatham, Lazarus Godson
    Wongwises, Somchai
    Babu, Jithu
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2015, 137 (11):
  • [29] Experimental investigation on the heat transfer performance of evacuated tube solar collector using CuO nanofluid and water
    Kang, Woobin
    Shin, Yunchan
    Cho, Honghyun
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (03) : 1477 - 1485
  • [30] Predicting Parameters of Heat Transfer in a Shell and Tube Heat Exchanger Using Aluminum Oxide Nanofluid with Artificial Neural Network (ANN) and Self-Organizing Map (SOM)
    Zolghadri, Amir
    Maddah, Heydar
    Ahmadi, Mohammad Hossein
    Sharifpur, Mohsen
    SUSTAINABILITY, 2021, 13 (16)