ITER vacuum vessel structural analysis completion during manufacturing phase

被引：8

作者：

Martinez, J. -M. ^{[1
]}

Alekseev, A. ^{[1
]}

Sborchia, C. ^{[1
]}

Choi, C. H. ^{[1
]}

Utin, Y. ^{[1
]}

Jun, C. H. ^{[1
]}

Terasawa, A. ^{[1
]}

Popova, E. ^{[1
]}

Xiang, B. ^{[1
]}

Sannazaro, G. ^{[1
]}

Lee, A. ^{[1
]}

Martin, A. ^{[1
]}

Teissier, P. ^{[1
]}

Sabourin, F. ^{[1
]}

Caixas, J. ^{[2
]}

Fernandez, E. ^{[2
]}

Zarzalejos, J. M. ^{[2
]}

Kim, H. -S. ^{[3
]}

Kim, Y. G. ^{[3
]}

Privalova, E. ^{[4
]}

Du, S. ^{[5
]}

Wang, S. ^{[5
]}

Albin, V. ^{[6
]}

Gaucher, T. ^{[6
]}

Borrelly, S. ^{[7
]}

Cambazar, M. ^{[8
]}

Sfarni, S. ^{[8
]}

机构：

[1] ITER Org, Route Vinon Verdon,CS 90046, F-13067 St Paul Les Durance, France

[2] F4E, C Josep Pla 2,Torres Diagonal Litoral,Edificio B3, E-08019 Barcelona, Spain

[3] ITER Korea, Natl Fus Res Inst, Daejeon, South Korea

[4] NTC Sintez, Efremov Inst, St Petersburg 189631, Russia

[5] Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei, Peoples R China

[6] Sogeti High Tech, RE2, 180 Rue Rene Descartes, F-13857 Aix En Provence, France

[7] SOM Calcul Grp ORTEC, 121 Ancien Chemin Cassis, F-13009 Marseille, France

[8] ZAC St Martin, Assyst EOS, 23 Rue Benjamin Franklin, F-84120 Pertuis, France

来源：

FUSION ENGINEERING AND DESIGN | 2016年 / 109卷

关键词：

ITER; Vacuum vessel; Nuclear Pressure Equipment; Structural integrity; Analysis; Manufacturing design; RCC-MR;

D O I：

10.1016/j.fusengdes.2016.02.017

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Some years ago, analyses were performed by ITER Organization Central Team (IO-CT) to verify the structural integrity of the ITER vacuum vessel baseline design fixed in 2010 and classified as a Protection Important Component (PIC). The manufacturing phase leads the ITER Organization domestic agencies (IO-DA) and their contracted manufacturers to propose detailed design improvements to optimize the manufacturing or inspection process. These design and quality inspection changes can affect the structural margins with regards to the Codes&Standards and thus oblige to evaluate one more time the modified areas. This paper proposes an overview of the additional analyses already performed to guarantee the structural integrity of the manufacturing designs. In this way, CT and DAs have been strongly involved to keep the considerable margins obtained previously which were used to fix reasonable compensatory measures for the lack of In Service Inspections of a Nuclear Pressure Equipment (NPE). (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：688 / 692

页数：5

共 50 条

[1] Manufacturing completion of the first ITER vacuum vessel sector
Kim, H. S.
Moon, H. K.
Park, C. K.
Jung, Y. J.
Ha, M. S.
Park, S. H.
Joo, Y. M.
Joo, J. K.
Kang, S. G.
Seo, Y. H.
Han, J. Y.
Lim, N. J.
Yoon, B. H.
Choi, S. Y.
Hwang, H. S.
Hong, K. H.
Ahn, H. J.
Lee, Y. J.
Kim, B. C.
Lee, H. G.
Jung, K. J.
Sa, J. W.
Choi, C. H.
Chung, W. H.
Kim, H. K.
Kim, Y. G.
Kim, G. H.
Hong, Y. S.
Martinez, J. M.
Martin, A.
Jing, J.
Privalov, M.
Xiang, B.
Lobinger, F.
Pedrosa, N.
Rodilla, E.
Utin, Y.
Mestric, A.
Jung, Y. S.
Tok, J. Y. W.
Park, K. H.
Kim, H. C.
Seok, S. H.
Park, D. B.
Moon, G. H.
Lee, J. H.
Lim, K. S.
Kim, J. B.
Yeo, H. K.
Lee, J. J.
NUCLEAR FUSION, 2022, 62 (07)
[2] Structural analysis of the ITER Vacuum Vessel regarding 2012 ITER Project-Level Loads
Martinez, J. -M.
Jun, C. H.
Portafaix, C.
Choi, C. -H.
Ioki, K.
Sannazzaro, G.
Sborchia, C.
Cambazar, M.
Corti, Ph.
Pinori, K.
Sfarni, S.
Tailhardat, O.
Borrelly, S.
Albin, V.
Pelletier, N.
FUSION ENGINEERING AND DESIGN, 2014, 89 (7-8) : 1836 - 1842
[3] Structural integrity analysis for manufacturing design of the ITER vacuum vessel gravity support
Wang, Songke
Martinez, Jean-Marc
Schioler, Tyge
Tailhardat, Olivier
Le Barbier, Robin
Choi, Chang Ho
FUSION ENGINEERING AND DESIGN, 2018, 135 : 228 - 233
[4] Manufacturing design of typical attachments in the vacuum vessel of ITER
Kim, Yugyeong
Privalov, Mikhail
Jing, Juntao
Mestric, Arnaud
FUSION ENGINEERING AND DESIGN, 2021, 163
[5] Structural and fracture mechanics analysis of ITER vacuum vessel
Iguchi, Masahide
Saito, Masakatsu
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2029 - 2034
[6] Demonstration tests for manufacturing the ITER vacuum vessel
Shimizu, Katsusuke
Onozuka, Masanori
Usui, Yukinori
Urata, Kazuhiro
Tsujita, Yoshihiro
Nakahira, Masataka
Takeda, Nobukazu
Kakudate, Satoshi
Ohmori, Junji
Shibanuma, Kiyoshi
FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2081 - 2088
[7] Structural damages prevention of the ITER vacuum vessel and ports by elasto-plastic analysis with regards to RCC-MR
Martinez, Jean-Marc
Jun, Chang Hoon
Portafaix, Christophe
Alekseev, Alexander
Sborchia, Carlo
Choi, Chang-Ho
Albin, Vincent
Borrelly, Stephane
Cambazar, Magali
Gaucher, Thomas
Sfarni, Samir
Tailhardat, Olivier
FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1552 - 1555
[8] Manufacturing design of the ITER vacuum vessel lower port in Korea
Kim, H. S.
Kim, G. H.
Park, C. K.
Hong, K. H.
Jin, S. W.
Ahn, H. J.
Lee, H. G.
Kim, Y. G.
Lee, J. S.
Kim, T. S.
Won, J. G.
Sa, J. W.
Utin, Y.
Jun, C. H.
Choi, C. H.
FUSION ENGINEERING AND DESIGN, 2015, 101 : 175 - 179
[9] Design and structural analysis of support structure for ITER vacuum vessel
Takeda, N
Ohmori, J
Nakahira, M
Shibanuma, K
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2004, 41 (12) : 1280 - 1286
[10] Design analysis of the hinge support for the ITER vacuum vessel
Kim, B. Y.
Ahn, H. J.
Ha, M. S.
Kim, Y. K.
Kim, H. S.
Sa, J. W.
Kim, B. C.
Bak, J. S.
Choi, C. H.
Ioki, K.
Wang, X.
Bachmann, C.
FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 2003 - 2007

← 1 2 3 4 5 →