Effect of Machining Parameters on Surface Finish and Noise Patterns for Machining EN-19 Steel with PVD-TiN Coated Mixed Ceramic Inserts in CNC Turning Operation

被引：0

作者：

Arora, Deepti ^{[1
]}

Duvedi, Ravinder Kumar ^{[2
]}

Singh, Daljeet ^{[2
]}

机构：

[1] Swami Vivekanand Subharti Univ, Dept Mech Engn, Subharti Inst Technol & Engn, Meerut 250005, Uttar Pradesh, India

[2] Thapar Inst Engn & Technol, Dept Mech Engn, Patiala 147004, Punjab, India

来源：

JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH | 2020年 / 79卷 / 03期

关键词：

CNC turning; Surface finish optimization; Frequency spectrum analysis; MACHINABILITY; PREDICTION; ROUGHNESS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents a relationship between the surface finish, machining conditions and the noise level generated by the turning operation for machining of EN-19 alloy steel using PVD-TiN coated mixed ceramic (Al2O3+TiCN) inserts on a CNC turning centre under wet lubrication conditions. The machining parameters considered in this study include cutting velocity, feed rate and depth of cut. The levels of machining parameters for the experimental investigation are determined using full factorial experiment model and ANOVA is applied to find the effect of machining parameters on surface roughness. Additionally, noise generated during the cutting operation for all set of experiment trials is recorded to determines the relationship between machining conditions and the surface finish.

引用

页码：235 / 240

页数：6

共 10 条

[1] Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC) [J].

Agrawal, Anupam ;

Goel, Saurav ;

Bin Rashid, Waleed ;

Price, Mark .

APPLIED SOFT COMPUTING, 2015, 30 :279-286

[2]

Arulkirubakaran D, 2019, J SCI IND RES INDIA, V78, P216

[3] Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool [J].

Das, Sudhansu Ranjan ;

Dhupal, Debabrata ;

Kumar, Amaresh .

MEASUREMENT, 2015, 62 :108-126

[4] Surface Roughness Investigation in the Hard Turning of Steel Using Ceramic Tools [J].

Ferreira, R. ;

Carou, D. ;

Lauro, C. H. ;

Davim, J. P. .

MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (05) :648-652

[5] Pattern recognition in audible sound energy emissions of AISI 52100 hardened steel turning: a MFCC-based approach [J].

Frigieri, Edielson P. ;

Brito, Tarcisio G. ;

Ynoguti, Carlos A. ;

Paiva, Anderson P. ;

Ferreira, Joao R. ;

Balestrassi, Pedro P. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (5-8) :1383-1392

[6]

Girinath B, 2018, J SCI IND RES INDIA, V77, P35

[7] Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization [J].

Meddour, I. ;

Yallese, M. A. ;

Khattabi, R. ;

Elbah, M. ;

Boulanouar, L. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (5-8) :1387-1399

[8]

Mondal K, 2015, MATER MANUF PROCESS, V31, P1

[9]

Nataraj M, 2018, J SCI IND RES INDIA, V77, P318

[10]

Singh R, 2019, J SCI IND RES INDIA, V78, P166

← 1 →