Characterization of nanoparticle mixed 316 L powder for additive manufacturing

Nanoparticles reinforced steels have many advantaged mechanical properties. Additive manufacturing offers a new method for fabricating nanoparticles reinforced high performance metal components. In this work, we report the application of low energy ball milling in mixing nanoparticles and micron 316 L powder. With this method, 0.3 and 1.0 wt% Y2O3 nanoparticles can be uniformly distributed on the surface of 316 L powder with the parameters of ball-to-powder ratio at 1:1, speed at 90 rpm and 7 h of mixing. The matrix 316 L powders remain spherical in shape after the mixing process. In the meantime, the effect of low energy ball milling and the addition of Y2O3 nanoparticles on the powder characteristics (flowability, apparent density and tap density) are also studied. Results show that the process of low energy ball milling itself can slightly decrease the flowability and apparent density of the 316 L powder. The addition of 0.3 and 1.0 wt% Y2O3 nanoparticles can also decrease the flowability, the tap density and the apparent density compared with the original 316 L powder. All of these changes result from the rough surface of the mixed powder produced by ball milling and the addition of Y2O3 nanoparticles. The powder's rough surface can increase the coefficient of friction of powders. The mixture of 316 L powder and Y2O3 nanoparticles can be successfully used for selective laser melting (SLM). The relative density of SLM 316 L-Y2O3 is measured at 99.5%. However, Y2O3 agglomerations were observed which is due to the poor wettability between 316 L and Y2O3. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.