Effect of strain ageing on the mechanical properties of partially damaged structural mild steel

被引:37
作者
Hosseini, Sajjad [1 ]
Heidarpour, Amin [1 ]
Collins, Frank [1 ]
Hutchinson, Christopher R. [2 ]
机构
[1] Monash Univ, Dept Civil Engn, Melbourne, Vic 3800, Australia
[2] Monash Univ, Dept Mat Engn, Melbourne, Vic 3800, Australia
基金
澳大利亚研究理事会;
关键词
Strain ageing; Damaged structures; Steel material; Ramberg-Osgood; Micro-structure; TEMPERATURES; BEHAVIOR;
D O I
10.1016/j.conbuildmat.2014.12.021
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper addresses the strain ageing effects on the mechanical properties of the partially damaged structural mild steel. Since repairing partly damaged structures may not occur immediately, the strain ageing effect can significantly influence the structural behaviour. The changes due to this effect have not so far been considered in the civil engineering design guidelines. In order to investigate strain ageing effects, two-stage experimental tests are carried out on the mild-steel specimens. In the first stage, partial damage is made using quasi-static loading. During the second stage, the strength and ductility of the specimens are examined after 2 and 7 days 'ageing' at room temperature and the results are compared with the corresponding no-age samples. The microstructure of the specimens is examined using scanning electron microscopy (SEM). To illustrate the effect of strain ageing on the global behaviour of steel structures, a numerical example is provided in which strain ageing impacts on loading capacity and deflection of a steel beam. Finally, the stress-strain relation of partially damaged mild-steel material incorporating strain ageing effects is expressed by calibrating the parameters of Ramberg-Osgood model. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:83 / 93
页数:11
相关论文
共 28 条
[1]  
Abbaschian R., 2008, Physical Metallurgy Principles, V4th
[2]   Microstructure based modeling for the mechanical behavior of ferrite-pearlite steels suitable to capture isotropic and kinematic hardening [J].
Allain, S. ;
Bouaziz, O. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2) :329-336
[3]  
[Anonymous], 2005, ASNZS4600
[4]  
[Anonymous], 2003, MMPDS01
[5]  
[Anonymous], 2005, Specification for Structural Steel Buildings
[6]  
[Anonymous], 1998, D42263 ASTM, VI, P1
[7]  
[Anonymous], 2011, ASTME8E8M
[8]  
AS4100, 1998, AS4100
[9]  
BHP, 1998, HOT ROLL PROD
[10]   Kinetics of strain aging in drawn pearlitic steels [J].
Buono, VTL ;
Andrade, MS ;
Gonzalez, BM .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (05) :1415-1423