Deposition of hydroxyapatite thin films by excimer laser ablation

被引：87
作者：
Fernandez-Pradas, JM [1 ]
Sardin, G [1 ]
Cleries, L [1 ]
Serra, P [1 ]
Ferrater, C [1 ]
Morenza, JL [1 ]
机构：
[1] Univ Barcelona, Dept Fis Aplicada & Elect, E-08028 Barcelona, Spain
来源：
THIN SOLID FILMS | 1998年 / 317卷 / 1-2期
关键词：
hydroxyapatite thin films; excimer laser ablation; Ti-6Al-4V substrates;
D O I：
10.1016/S0040-6090(97)00629-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the pressure of a sole water atmosphere during the pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V substrates has been studied. The rest of the technological parameters involved in the process have been fixed near the conditions where the best crystalline coatings are obtained. The pressure of the water atmosphere has been varied between 0.15 and 1.5 mbar. The films properties have been analysed by means of XRD, SEM, FT-IR spectroscopy and SIMS. An optimal region, in order to obtain thin films of highly crystalline hydroxyapatite, has been found near 0.5 mbar for the two excimer laser wavelengths (193 nm and 248 nm) used in this study. These films have a preferential orientation in the (100) direction. (C) 1998 Elsevier Science S.A.
引用
收藏
页码：393 / 396
页数：4
相关论文
共 50 条
  • [31] Micro-holes in gold foils machined by excimer laser ablation
    Chen, ZL
    Liu, S
    Shi, TL
    Xiong, LC
    Qu, JB
    FIFTH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, PROCEEDINGS, 2003, : 172 - 175
  • [32] Thickness dependence of crystallization process for hydroxyapatite thin films
    Mercioniu, I.
    Ciuca, S.
    Pasuk, I.
    Slav, A.
    Morosanu, C.
    Bercu, M.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2007, 9 (08): : 2535 - 2538
  • [33] Excimer laser ablation of Ba2NaNb5O15 optical waveguide films on MgO(001) substrates
    Guo, XL
    Liu, ZG
    Zhu, SN
    Zhu, YY
    Xiong, SB
    Lin, CY
    MATERIALS LETTERS, 1996, 29 (1-3) : 155 - 158
  • [34] 193 nm ArF Laser Ablation of Chitosan Doped Molybdenum Complex Composite Thin Films
    Aesa, Abdulsattar A.
    Walton, C. D.
    NONLINEAR OPTICS QUANTUM OPTICS-CONCEPTS IN MODERN OPTICS, 2022, 56 (3-4): : 167 - 181
  • [35] Multilevel diffractive optical element manufacture by excimer laser ablation and halftone masks
    Quentel, F
    Fieret, J
    Holmes, AS
    Paineau, S
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING VI, 2001, 4274 : 420 - 431
  • [36] Investigation of KrF excimer laser ablation and induced surface damage on lithium niobate
    Chong, HW
    Mitchell, A
    Hayes, JP
    Austin, MW
    APPLIED SURFACE SCIENCE, 2002, 201 (1-4) : 196 - 203
  • [37] Custom specific fabrication of integrated optical devices by excimer laser ablation of polymers
    Klotzbücher, T
    Popp, M
    Braune, T
    Haase, J
    Gaudron, A
    Smaglinski, I
    Paatzsch, T
    Bauer, HD
    Ehrfeld, W
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING V, 2000, 3933 : 290 - 298
  • [38] Excimer laser ablation based microlens fabrication for optical fiber coupling purposes
    Naessens, K
    Van Daele, P
    Baets, R
    LASER MICROMACHINING FOR OPTOELECTRONIC DEVICE FABRICATION, 2003, 4941 : 133 - 139
  • [39] PROPERTIES OF TL2BA2CA2CU3OX THIN-FILMS WITH A CRITICAL-TEMPERATURE OF 122-K PREPARED BY EXCIMER LASER ABLATION
    NABATAME, T
    SAITO, Y
    AIHARA, K
    KAMO, T
    MATSUDA, SP
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1990, 29 (10): : L1813 - L1815
  • [40] Influence of the ablation plume on the removal process during ArF-excimer laser photoablation
    Dorbecker, C
    Lubatschowski, H
    Lohmann, S
    Ruff, C
    Kermani, O
    Ertmer, W
    LASERS IN OPHTHALMOLOGY III, PROCEEDINGS OF, 1996, 2632 : 2 - 9
12345