Deposition of hydroxyapatite thin films by excimer laser ablation

被引:87
作者
Fernandez-Pradas, JM [1 ]
Sardin, G [1 ]
Cleries, L [1 ]
Serra, P [1 ]
Ferrater, C [1 ]
Morenza, JL [1 ]
机构
[1] Univ Barcelona, Dept Fis Aplicada & Elect, E-08028 Barcelona, Spain
关键词
hydroxyapatite thin films; excimer laser ablation; Ti-6Al-4V substrates;
D O I
10.1016/S0040-6090(97)00629-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of the pressure of a sole water atmosphere during the pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V substrates has been studied. The rest of the technological parameters involved in the process have been fixed near the conditions where the best crystalline coatings are obtained. The pressure of the water atmosphere has been varied between 0.15 and 1.5 mbar. The films properties have been analysed by means of XRD, SEM, FT-IR spectroscopy and SIMS. An optimal region, in order to obtain thin films of highly crystalline hydroxyapatite, has been found near 0.5 mbar for the two excimer laser wavelengths (193 nm and 248 nm) used in this study. These films have a preferential orientation in the (100) direction. (C) 1998 Elsevier Science S.A.
引用
收藏
页码:393 / 396
页数:4
相关论文
共 50 条
  • [1] Preparation of polyacenic semiconductive thin films by excimer laser ablation
    Nishio, S
    Kato, S
    Matsuzaki, A
    Sato, H
    Kinoshita, H
    Yata, S
    Tanaka, K
    Yamabe, T
    SYNTHETIC METALS, 1996, 83 (01) : 67 - 71
  • [2] Patterning of magnetron sputtered SmCo thin films by excimer laser ablation
    Wang, YH
    Ghantasala, MK
    Sood, DK
    Harvey, EC
    NANO- AND MICROTECHNOLOGY: MATERIALS, PROCESSES, PACKAGING, AND SYSTEMS, 2002, 4936 : 177 - 185
  • [3] Effects of copper on hydroxyapatite thin films by pulsed laser deposition on silicon
    Bohorquez-Santiago, Leonardo
    Devia-Narvaez, Diana M.
    Ospina-Ospina, Rogelio
    Torres-Ceron, Darwin A.
    Amaya-Roncancio, Sebastian
    Martinez, Sebastian
    Castillo-Paz, Angelica M.
    Rodriguez-Garcia, Mario E.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2025, 108 (02)
  • [4] Preparation of polyperinaphthalene thin films by excimer laser ablation and their application to optic and electronic devices
    Nishio, S
    Sato, H
    Ando, N
    Hato, Y
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2002, 15 (01) : 71 - 76
  • [5] Preparation of CuInSe2 thin films with large grain by excimer laser ablation
    Yoshida, A
    Tanahashi, N
    Tanaka, T
    Demizu, Y
    Yamamoto, Y
    Yamaguchi, T
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1998, 50 (1-4) : 7 - 12
  • [6] AFM study of excimer laser ablation of polythiophene films
    Tsunoda, K
    Ishii, T
    Tezuka, Y
    Yajima, H
    JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY, 1997, 106 (1-3) : 21 - 26
  • [7] Growth of polycrystalline hydroxyapatite thin films by pulsed laser deposition and subsequent heat-treatment in air
    Nelea, VD
    Ghica, C
    Martin, C
    Hening, A
    Mihailescu, IN
    Nistor, LC
    Teodorescu, VS
    Alexandrescu, R
    Werckmann, J
    Gyorgy, E
    Marin, G
    FIFTH CONFERENCE ON OPTICS (ROMOPTO '97), PTS 1 AND 2, 1998, 3405 : 218 - 224
  • [8] Preparation of polyperinaphthalenic organic semiconductor thin films by excimer laser ablation and application to anode electrodes for ultra thin rechargeable lithium ion batteries
    Nishio, S
    Kuriki, S
    Tsujine, Y
    Matsuzaki, A
    Sato, H
    Ando, N
    Hato, Y
    Tanaka, K
    LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING V, 2000, 3933 : 487 - 495
  • [9] Hydroxyapatite thin films grown by pulsed laser deposition and radio-frequency magnetron sputtering: comparative study
    Nelea, V
    Morosanu, C
    Iliescu, M
    Mihailescu, IN
    APPLIED SURFACE SCIENCE, 2004, 228 (1-4) : 346 - 356
  • [10] PREPARATION OF YBA2CU3OY SUPERCONDUCTING THIN-FILMS ON METALLIC SUBSTRATES BY EXCIMER LASER ABLATION
    SAITOH, J
    FUKUTOMI, M
    KOMORI, K
    TANAKA, Y
    ASANO, T
    MAEDA, H
    TAKAHARA, H
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1991, 30 (5B): : L898 - L900