Experimental Research of Selected Lattice Structures Developed with 3D Printing Technology

被引：16

作者：

Bogusz, Pawel ^{[1
]}

Poplawski, Arkadiusz ^{[1
]}

Stankiewicz, Michal ^{[1
]}

Kowalski, Bartlomiej ^{[1
]}

机构：

[1] Mil Univ Technol, Fac Mech Engn, PL-00908 Warsaw, Poland

来源：

MATERIALS | 2022年 / 15卷 / 01期

关键词：

3D topologies; lattice structures; 3D printing; additive manufacturing technique; experimental research; energy absorbing test; compression curves; CELLULAR STRUCTURES; MULTISCALE ANALYSIS; BEHAVIOR; STIFFNESS; RATIO;

D O I：

10.3390/ma15010378

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This paper presents the results of the experimental research of 3D structures developed with an SLA additive technique using Durable Resin V2. The aim of this paper is to evaluate and compare the compression curves, deformation process and energy-absorption parameters of the topologies with different characteristics. The structures were subjected to a quasi-static axial compression test. Five different topologies of lattice structures were studied and compared. In the initial stage of the research, the geometric accuracy of the printed structures was analysed through measurement of the diameter of the beam elements at several selected locations. Compression curves and the stress history at the minimum cross-section of each topology were determined. Energy absorption parameters, including absorbed energy (AE) and specific absorbed energy (SAE), were calculated from the compression curves. Based on the analysis of the photographic material, the failure mode was analysed, and the efficiency of the topologies was compared.

引用

页数：18

共 45 条

[1] Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials [J].

Al-Ketan, Oraib ;

Rowshan, Reza ;

Abu Al-Rub, Rashid K. .

ADDITIVE MANUFACTURING, 2018, 19 :167-183

[2] Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading [J].

Andrew, J. Jefferson ;

Schneider, Johannes ;

Ubaid, Jabir ;

Velmurugan, R. ;

Gupta, N. K. ;

Kumar, S. .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2021, 149

[3] Effective Design of the Graded Strut of BCC Lattice Structure for Improving Mechanical Properties [J].

Bai, Long ;

Yi, Changyan ;

Chen, Xiaohong ;

Sun, Yuanxi ;

Zhang, Junfang .

MATERIALS, 2019, 12 (13)

[4] Multiscale analysis and mechanical characterization of open-cell foams by simplified FE modeling [J].

Belardi, V. G. ;

Fanelli, P. ;

Trupiano, S. ;

Vivio, F. .

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2021, 89

[5] Mechanics of deformation-triggered pattern transformations and superelastic behavior in periodic elastomeric structures [J].

Bertoldi, K. ;

Boyce, M. C. ;

Deschanel, S. ;

Prange, S. M. ;

Mullin, T. .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2008, 56 (08) :2642-2668

[6] High specific strength and stiffness structures produced using selective laser melting [J].

Challis, Vivien J. ;

Xu, Xiaoxue ;

Zhang, Lai Chang ;

Roberts, Anthony P. ;

Grotowski, Joseph F. ;

Sercombe, Timothy B. .

MATERIALS & DESIGN, 2014, 63 :783-788

[7] Compressive properties of functionally graded lattice structures manufactured by selective laser melting [J].

Choy, Sing Ying ;

Sun, Chen-Nan ;

Leong, Kah Fai ;

Wei, Jun .

MATERIALS & DESIGN, 2017, 131 :112-120

[8]

Dar UA, 2020, INT BHURBAN C APPL S, P162, DOI [10.1109/IBCAST47879.2020.9044581, 10.1109/ibcast47879.2020.9044581]

[9] Dynamic energy absorption characteristics of additively-manufactured shape-recovering lattice structures [J].

Davami, Keivan ;

Mohsenizadeh, Mehrdad ;

Munther, Michael ;

Palma, Tyler ;

Beheshti, Ali ;

Momeni, Kasra .

MATERIALS RESEARCH EXPRESS, 2019, 6 (04)

[10] Numerical and experimental investigation of the joint stiffness in lattice structures fabricated by additive manufacturing [J].

Dong, Guoying ;

Zhao, Yaoyao Fiona .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 148 :475-485

← 1 2 3 4 5 →