Surfactant-assisted electrodeposition of Au-Co/WS2 self-lubricating coating from WS2 suspended cyanide electrolyte

被引:16
作者
Chen, Zhaoxi [1 ,2 ]
Wagner, Julien [2 ]
Turq, Viviane [2 ]
Hillairet, Julien [1 ]
Taberna, Pierre-Louis [2 ]
Laloo, Raphael [2 ]
Duluard, Sandrine [2 ]
Bernard, Jean-Michel [1 ]
Song, Yuntao [3 ]
Yang, Qingxi [3 ]
Lu, Kun [3 ]
Cheng, Yong [3 ]
机构
[1] CEA, IRFM, Bldg 508, F-13108 St Paul Les Durance, France
[2] UPS, Inst Carnot CIRIMAT, UMR, CNRS,INP 5085, 118 Route Narbonne, F-31062 Toulouse 9, France
[3] Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Anhui, Peoples R China
关键词
Au-Co coating; Electrodeposition; Tungsten disulfide; Triton X-100; Tribology; MECHANICAL-PROPERTIES; COMPOSITE COATINGS; TRIBOLOGICAL BEHAVIOR; ELECTRICAL-PROPERTIES; TRITON X-100; AU-CO; PERFORMANCE; DISPERSION; MORPHOLOGY; MATRIX;
D O I
10.1016/j.jallcom.2020.154585
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this study, Triton X-100 was used as the WS2 dispersion agent in the Au-Co cyanide electrolyte to deposit Au-Co/WS2 composite coatings. Probe sonication was applied to exfoliate the commercial WS2 powders to produce thinner and smaller WS2 flakes, which improved the stability of the WS2 particles in the electrolyte. According to the electrochemical analyses, the effects of adding Triton X-100 and WS2 particles to the electroplating process were investigated. Through material characterizations, WS2 particles were proved to be compounded into the Au-Co matrix and showed clearly {002} preferred orientation due to their flake structures. Tribological tests were performed under dry condition in 10(-3) Pa vacuum against stainless steel 316L balls with diameters of 3 mm and a normal contact force of 2 N. The Au-Co/WS2 composite coatings that developed showed the minimum coefficient of friction and wear rate of 0.05 and 8 x 10(-6) mm(3)/N.m, which are 5 times and 3 times lower than the Au-Co reference coating, respectively. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数:12
相关论文
共 52 条
  • [11] Green stabilization of microscale iron particles using guar gum: Bulk rheology, sedimentation rate and enzymatic degradation
    Gastone, Francesca
    Tosco, Tiziana
    Sethi, Rajandrea
    [J]. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2014, 421 : 33 - 43
  • [12] Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites
    Geng, Yan
    Liu, Ming Yang
    Li, Jing
    Shi, Xiao Mei
    Kim, Jang Kyo
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (12) : 1876 - 1883
  • [13] Pulsed electrodeposition of Zn in the presence of surfactants
    Gomes, A
    Pereira, MID
    [J]. ELECTROCHIMICA ACTA, 2006, 51 (07) : 1342 - 1350
  • [14] He Y, 2017, TRANSIENT ELECTROMAGNETIC-THERMAL NONDESTRUCTIVE TESTING: PULSED EDDY CURRENT AND TRANSIENT EDDY CURRENT THERMOGRAPHY, P1
  • [15] Synthesis and Properties of Electrodeposited Ni-Co/WS2 Nanocomposite Coatings
    He, Yang
    Wang, Shuncai
    Sun, Wanting
    Reed, Philippa A. S.
    Walsh, Frank C.
    [J]. COATINGS, 2019, 9 (02):
  • [16] Holmbom G., 1995, P AESF ANN TECHN C B
  • [17] The effect of Tl(I) on the hard gold alloy electrodeposition of Au-Co from acid baths
    Hosseini, Mirghasem
    Ebrahimi, Soheila
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2010, 645 (02) : 109 - 114
  • [18] Electrodeposition and mechanical properties of Ni-carbon nanotube nanocomposite coatings
    Jeon, Y. S.
    Byun, J. Y.
    Oh, T. S.
    [J]. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2008, 69 (5-6) : 1391 - 1394
  • [19] Electrostatically Induced Superconductivity at the Surface of WS2
    Jo, Sanghyun
    Costanzo, Davide
    Berger, Helmuth
    Morpurgo, Alberto F.
    [J]. NANO LETTERS, 2015, 15 (02) : 1197 - 1202
  • [20] Kim Y.-A., J KOR PHYS SOC, V33