A novel approach for prediction of surface roughness in turning of EN353 steel by RVR-PSO using selected features of VMD along with cutting parameters

The abrupt changes in tool-workpiece interaction during machining process induce variation in the surface quality of work material. These interactions include built-up edge formation and their break-off, environmental conditions (use of coolant, rise of temperature etc.), material imperfections, improper structural fitness of machine & tool components, etc. This study presents prediction of surface roughness in turning of EN353 steel implementing the variational mode decomposition (VMD) for processing the vibration data, followed by estimation of the surface roughness using the relevance vector regression (RVR) optimized by particle swarm optimization (PSO). The raw vibration data has been decomposed in five discrete sets of frequency components known as variational mode functions (VMFs). A set of twenty-one statistical features in each three axes have been extracted for raw data and each VMF. The RVR has been trained using these 21x3 = 63 features and 3 cutting parameters - cutting speed, feed depth of cut. The RVR has also been trained separately using top 5 features selected through RreliefF algorithm. The optimal decomposition level has been determined to minimize the noise and predict the surface finish accurately. The results obtained in 1st VMF (high frequency, low amplitude) using its top 5 features for prediction have been found to be reliable with higher prediction accuracy.