Surface engineering by co-injection moulding

被引：26

作者：

Alcock, JR ^{[1
]}

Logan, PM ^{[1
]}

Stephenson, DJ ^{[1
]}

机构：

[1] Cranfield Univ, Sch Ind & Mfg Sci, Cranfield MK43 0AL, Beds, England

来源：

SURFACE & COATINGS TECHNOLOGY | 1998年 / 105卷 / 1-2期

关键词：

co-injection; powder injection moulding; process modelling; sintering; wear/corrosion resistance;

D O I：

10.1016/S0257-8972(98)00443-5

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A novel process, powder co-injection moulding (PCM), a development of powder injection moulding is described. A twin-barrel injection moulding machine has been used to inject two different powder/binder mixtures sequentially into a mould. The new process allows surface engineering during powder injection moulding rather than as a post-production stage in the manufacturing cycle. Two examples of co-injection moulding are described. The first considers a polymer component having a particulate or fibre-reinforced skin layer. The second discusses the production of dense, layered ceramic or metal components having a corrosion- or wear-resistant surface layer. Modelling of the PCM process is being undertaken using a commercial finite-element modelling program, G-Mold and an example of how this may be used to predict coating thickness is presented. (C) 1998 Elsevier Science S.A.

引用

页码：65 / 71

页数：7

共 50 条

[21] Study on co-injection molding of poly(styrene-ethylene-butylene-styrene) and polypropylene: Simulation and experiment [J].

He, Wenjun ;

Yang, Jian ;

Chen, Yaowei ;

Liu, Puyuan ;

Li, Chao ;

Xiong, Mengyuan ;

Niu, Xinsheng ;

Li, Xiaoyan .

POLYMER TESTING, 2022, 108

[22] STUDY OF CO-INJECTION OF NATURAL GAS AND PULVERIZED COAL IN BLAST FURNACE UNDER PURE OXYGEN ENVIRONMENT [J].

Gu, Mingyan ;

Li, Jiaxin .

HT2008: PROCEEDING OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, VOL 3, 2009, :169-178

[23] Transient temperature-pressure field model of supercritical CO2 fracturing wellbore with tubing and annulus co-injection [J].

Wu, Lin ;

Luo, Zhifeng ;

Zhao, Liqiang ;

Zhang, Nanling ;

Yao, Zhiguang ;

Jia, Yucheng .

GREENHOUSE GASES-SCIENCE AND TECHNOLOGY, 2022, 12 (01) :85-102

[24] Preparation of hard metal (WC-10Co) components by powder injection moulding [J].

Gutiérrez, JAE ;

Fredel, MC ;

Wendhausen, PP ;

Klein, AN .

ADVANCED POWDER TECHNOLOGY II, 2001, 189-1 :579-585

[25] Effect of additives on sintering response of titanium by powder injection moulding [J].

Arockiasamy, A. ;

German, Randall M. ;

Heaney, D. F. ;

Wang, P. T. ;

Horstemeyer, M. F. ;

King, R. L. ;

Adcock, B. .

POWDER METALLURGY, 2011, 54 (03) :420-426

[26] Injection moulding and sintering of ceria ceramics [J].

Maca, K ;

Trunec, M ;

Cihlar, J .

CERAMICS INTERNATIONAL, 2002, 28 (03) :337-344

[27] Parameters' optimisation of the injection moulding of ceramics [J].

Tavcar, A .

INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS, 1995, 25 (03) :214-217

[28] Overview of the powder injection moulding technology [J].

Berginc, B ;

Kuzman, K .

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2005, 51 (04) :217-227

[29] An Integrated Evaluation System of Anthracite, Meager-lean Coal and Bituminous Coal Co-injection for a Blast Furnace [J].

Ren, S. ;

Zhang, J. L. ;

Liu, W. J. ;

Su, B. X. ;

Xing, X. D. ;

Bai, Y. N. .

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2013, 35 (22) :2123-2131

[30] On the use of elemental powders to prepare Fe-50Co alloys by powder injection moulding [J].

Silva, A. ;

Wendhausen, P. ;

Machado, R. ;

Ristow, W., Jr. .

PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 :1353-+

← 1 2 3 4 5 →