ZMP-based motion planning algorithm for kinematically redundant manipulator standing on the ground

被引:3
|
作者
So, Byung-Rok [1 ]
Ryu, HwanTaek [2 ]
Yi, Byung-Ju [2 ]
机构
[1] Korea Inst Ind Technol, Robot R BD Grp, Cheonan, South Korea
[2] Hanyang Univ, Dept Elect Syst Engn, Seoul 133791, South Korea
基金
新加坡国家研究基金会;
关键词
ZMP constraint equation; Kinematically redundant manipulator; Redundancy resolution; Motion planning algorithm; BIPED ROBOT;
D O I
10.1007/s11370-014-0164-8
中图分类号
TP24 [机器人技术];
学科分类号
080202 ; 1405 ;
摘要
The human body can be modeled as a kinematically redundant manipulator which exploits "redundant degrees of freedom" to execute various motions in a suitable fashion. Differently from the typical kinematically redundant robots that are attached to the fixed ground, the zero moment point (ZMP) condition should be taken into account not to fall down. Thus, this paper investigates a motion planning algorithm for kinematically redundant manipulator standing on the ground. For this, a geometric constraint equation is derived from the existing ZMP equation. This constraint equation is formed like a second-order kinematic equation, which enables one to plan the ZMP trajectory in a feed-forward fashion. This constraint equation and the kinematic equation of the manipulator model are solved together. Then, the solution of this composite equation guarantees both the desired operational motion and the ZMP trajectory. The feasibility of the proposed algorithms is verified by simulating and experimenting several motions though a planar 3-DOF manipulator model.
引用
收藏
页码:35 / 44
页数:10
相关论文
共 50 条
  • [1] ZMP-based motion planning algorithm for kinematically redundant manipulator standing on the ground
    Byung-Rok So
    HwanTaek Ryu
    Byung-Ju Yi
    Intelligent Service Robotics, 2015, 8 : 35 - 44
  • [2] Motion control for kinematically redundant manipulator robots
    Miroshnik, IV
    Nikiforov, VO
    Shiegin, VV
    JOURNAL OF COMPUTER AND SYSTEMS SCIENCES INTERNATIONAL, 2001, 40 (01) : 161 - 167
  • [3] OPTIMAL MOTION PLANNING OF A PLANAR PARALLEL MANIPULATOR WITH KINEMATICALLY REDUNDANT DEGREES OF FREEDOM
    Abadi, Bahman Nouri Rahmat
    Taghvaei, Sajjad
    Vatankhah, Ramin
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2016, 40 (03) : 383 - 397
  • [4] Motion Planning for a Redundant Manipulator Using Genetic Algorithm
    Parasuraman, S.
    Hou, Chiew Mun
    Ganapathy, V.
    MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 467-469 : 782 - 787
  • [5] Hierarchical robust motion controller for kinematically redundant manipulator
    Oda, N
    IECON 2000: 26TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-4: 21ST CENTURY TECHNOLOGIES AND INDUSTRIAL OPPORTUNITIES, 2000, : 90 - 95
  • [6] Trajectory Planning and Time-Independent Motion Control for a Kinematically Redundant Hydraulic Manipulator
    Mettin, Uwe
    La Hera, Pedro X.
    Morales, Daniel Ortiz
    Shiriaev, Anton S.
    Freidovich, Leonid B.
    Westerberg, Simon
    ICAR: 2009 14TH INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS, VOLS 1 AND 2, 2009, : 309 - 314
  • [7] Overall Motion Planning for Kinematically Redundant Parallel Manipulators
    Carretero, Juan A.
    Ebrahimi, Iman
    Boudreau, Roger
    JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2012, 4 (02):
  • [8] Motion-Planning Algorithm for a Hyper-Redundant Manipulator in Narrow Spaces
    Zhang, Lei
    Huang, Shouzhi
    Du, Zhaocai
    Ouyang, Guangyao
    Chen, Heping
    CMC-COMPUTERS MATERIALS & CONTINUA, 2022, 72 (03): : 4817 - 4832
  • [9] Motion Planning for Kinematically Redundant Mobile Manipulators with Genetic Algorithm, Pose Interpolation, and Inverse Kinematics
    Vazquez-Santiago, Kyshalee
    Goh, Chun Fan
    Shimada, Kenji
    2021 IEEE 17TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), 2021, : 1167 - 1174
  • [10] Kinematic analysis and path planning of a new kinematically redundant planar parallel manipulator
    Ebrahimi, Iman
    Carretero, Juan A.
    Boudreau, Roger
    ROBOTICA, 2008, 26 : 405 - 413