Metallographic Study and Sliding Wear Optimization of Nano Si3N4 Reinforced High-Strength Al Metal Matrix Composites

被引:11
作者
Kumar, Ashish [1 ]
Rana, Ravindra Singh [1 ]
Purohit, Rajesh [1 ]
Saxena, Kuldeep K. [2 ]
Xu, Jinyang [3 ]
Malik, Vinayak [4 ,5 ]
机构
[1] Maulana Azad Natl Inst Technol, Dept Mech Engn, Bhopal 462003, Madhya Pradesh, India
[2] GLA Univ, Dept Mech Engn, Mathura 281406, Uttar Pradesh, India
[3] Shanghai Jiao Tong Univ, Sch Mech Engn, State Key Lab Mech Syst & Vibrat, Shanghai 200240, Peoples R China
[4] KLS Gogte Inst Technol, Dept Mech Engn, Belagavi 590008, Karnataka, India
[5] Visvevaraya Technol Univ, Dept Mech Engn, Belagavi 590018, Karnataka, India
关键词
aluminum metal matrix nanocomposites; dry sliding wear; hardness; optimization; TRIBOLOGICAL CHARACTERISTICS; HYBRID COMPOSITES; BEHAVIOR; FRICTION; MICROSTRUCTURE; MICROHARDNESS; NANOCOMPOSITE; FABRICATION; PARTICLES; ALLOYS;
D O I
10.3390/lubricants10090202
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The strongest among the all-aluminum alloy series is 7xxx due to its unique composition of alloying elements, making it perfect for automotive and aerospace applications. The present research included manufacturing of Si3N4 reinforced aluminum alloy (AA) 7068 nanocomposites via stir casting combined with ultrasonication, followed by a bottom pouring technique. The Si3N4 reinforcement has been conducted in different fractions (0.5, 1, 1.5, and 2%) by weight. The microstructure characterization of prepared composites was conducted using FESEM, EDS, and elemental mapping. The microstructure of the AA7068 matrix was significantly refined after incorporating Si3N4 nanoparticles. The hardness of alloy increased with reinforcement addition and maximized at 1.5 wt.% due to the combined effect of hard Si3N4, difference in thermal co-efficient, Hall-Petch, and Orowan strengthening mechanism. The wear resistance significantly increased after incorporating (Si3N4)np in the alloy by increased load-bearing capacity and hardness of nanocomposites. The wear of alloy and nanocomposites is mainly due to the adhesion, two-body, and three-body abrasion mechanism. Optimization of wear parameters was completed using the Taguchi approach. The L-25 orthogonal array was selected to perform the wear test, and, later, the ANOVA tool was used to understand the percentage contribution of each factor. The load has the maximum contribution of 65.67%, followed by reinforcement wt.% and sliding distance. Minimum wear loss was noticed when the wear test was conducted on optimum wear parameters (1.5 wt.% reinforcement, 10 N load, and 400 m sliding distance). Hardness and wear behavior were oppositely influenced by the clustering of particles found at 2 wt.% nanocomposites.
引用
收藏
页数:24
相关论文
共 38 条
[1]   Synthesis and characterization of graphene nanoplatelets reinforced AA7068 matrix nanocomposites produced by liquid metallurgy route [J].
Alipour, Mohammad ;
Eslami-Farsani, Reza .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 706 :71-82
[2]   Optimization of friction and wear behaviour of Al-Si3N4 nano composite and Al-Gr-Si3N4 hybrid composite under dry sliding conditions [J].
Ambigai, R. ;
Prabhu, S. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (05) :986-997
[3]  
[Anonymous], 2011, NEW TRENDS DEV AUTOI
[4]   Particulate metal matrix composites and their fabrication via friction stir processing - a review [J].
Bajakke, Padmakumar A. ;
Malik, Vinayak R. ;
Deshpande, Anand S. .
MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (08) :833-881
[5]   Processing of in situ aluminium matrix composites by micropyretic reactive sintering [J].
Basumallick, A. ;
Ghosh, S. .
MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (5-6) :692-695
[6]  
Bhuvanesh D, 2017, J ENG SCI TECHNOL, V12, P1295
[7]   Application of solid processing routes for the synthesis of graphene-aluminum composites- a review [J].
Chak, Vineet ;
Chattopadhyay, Himadri ;
Dora, T. L. .
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (11) :1219-1235
[8]   Fabrication and heat treatment of graphene nanoplatelets reinforced aluminium nanocomposites [J].
Chak, Vineet ;
Chattopadhyay, Himadri .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791 (791)
[9]   Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites [J].
Chen, Z. ;
Sun, G. A. ;
Wu, Y. ;
Mathon, M. H. ;
Borbely, A. ;
Chen, D. ;
Ji, G. ;
Wang, M. L. ;
Zhong, S. Y. ;
Wang, H. W. .
MATERIALS & DESIGN, 2017, 116 :577-590
[10]   Pressure infiltration processes to synthesize metal matrix composites - A review of metal matrix composites, the technology and process simulation [J].
Etemadi, R. ;
Wang, B. ;
Pillai, K. M. ;
Niroumand, B. ;
Omrani, E. ;
Rohatgi, P. .
MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (12) :1261-1290