An evaluation of the machinability of nitinol shape memory alloy by electrochemical polishing

Nitinol, a shape memory alloy (SMA), is manufactured from titanium and nickel, and is employed in various fields for use in devices such as micro sensors, ultra-precision devices and satellite wings. It is also highly recommended as a material in medical stents for insertion into the human body because it has excellent organic compatibility. However, because they are intended to be inserted into the human body, produces such as medical stents require a high-quality surface. Because nitinol has more of the characteristics of titanium than of nickel, one of Is drawbacks is that heat generated in nitinol during machining is not discharged smoothly and inner stress occurs when traditional machining methods are used. To overcome this difficulty, various non-traditional machining methods, including non-contact machining, have been investigated for use with nitinol. To further explore non-traditional machining methods that may be appropriate for use with nitinol, this study investigates the application of electrochemical polishing to the machining of nitinol. Characteristics of the electrochemical polishing (EP), a representative non-traditional machining, for nitinol SMA are studied. Nitinol SMA of the EP machining parameters such as electrolyte composition, applied current, machining time and inter electrode gap (IEG) are researched and the machined surface state is analyzed according to each parameters parameter. So, the most suitable EP machining conditions for nitinol SMA are derived.