Effect of height to diameter (h/d) ratio on the deformation behaviour of Fe-Al2O3 metal matrix nanocomposites

被引：9
作者：
Gupta, Pallav [1 ]
Kumar, Devendra [2 ]
Jha, A. K. [3 ]
Parkash, Om [2 ]
机构：
[1] Amity Univ, Dept Mech & Automat Engn, ASET, Noida 201313, Uttar Pradesh, India
[2] Banaras Hindu Univ, Dept Ceram Engn, Indian Inst Technol, Varanasi 221005, Uttar Pradesh, India
[3] Banaras Hindu Univ, Dept Mech Engn, Indian Inst Technol, Varanasi 221005, Uttar Pradesh, India
来源：
BULLETIN OF MATERIALS SCIENCE | 2016年 / 39卷 / 05期
关键词：
Metal matrix nanocomposites (MMNCs); scanning electron microscopy (SEM); density; hardness; deformation; COMPOSITES; SIZE;
D O I：
10.1007/s12034-016-1272-1
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present paper reports the effect of height to diameter (h/d) ratio on the deformation behaviour of Fe-Al2O3 metal matrix nanocomposites (MMNCs) during bulk processing. Sintered compacts were machined to the required size with different h/d ratios. Test specimens were subjected to deformation at room temperature under three different interfacial friction conditions such as dry, solid and liquid lubrications. Deformed specimens show a significant improvement in the density and hardness. Results also revealed the formation of a nanosize iron aluminate phase due to reactive sintering, which in turn contributes to grain refinement. Experimental density of the specimens was also verified with the theoretical density using the standard equations. It is expected that the present work will be useful in designing and developing MMNC products with better quality at competitive cost.
引用
收藏
页码：1245 / 1258
页数：14
相关论文
共 24 条
  • [1] Size effects in the particle-reinforced metal-matrix composites
    Chen, SH
    Wang, TC
    [J]. ACTA MECHANICA, 2002, 157 (1-4) : 113 - 127
  • [2] The influence of SiC particles on the compressive properties of metal matrix composites
    Gnjidic, Z
    Bozic, D
    Mitkov, M
    [J]. MATERIALS CHARACTERIZATION, 2001, 47 (02) : 129 - 138
  • [3] Gupta P., 2014, J COMPOS, P1
  • [4] Gupta P., 2013, ADV SCI ENG MED, V5, P366, DOI [10.1166/asem.2013.1265, DOI 10.1166/ASEM.2013.1265]
  • [5] Effect of sintering on wear characteristics of Fe-Al2O3 metal matrix composites
    Gupta, Pallav
    Kumar, Devendra
    Parkash, Om
    Jha, A. K.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2014, 228 (03) : 362 - 368
  • [6] Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) route
    Gupta, Pallav
    Kumar, Devendra
    Parkash, Om
    Jha, A. K.
    [J]. BULLETIN OF MATERIALS SCIENCE, 2013, 36 (05) : 859 - 868
  • [7] Commercial processing of metal matrix composites
    Harrigan, WC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 75 - 79
  • [8] Jha A K, 1988, IEI J MM, V68, P110
  • [9] Synthesis and characterization of Fe-ZrO2 metal matrix composites
    Jha, Pushkar
    Gupta, Pallav
    Kumar, Devendra
    Parkash, Om
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (17) : 2107 - 2115
  • [10] The production and application of metal matrix composite materials
    Kaczmar, JW
    Pietrzak, K
    Wlosinski, W
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 106 (1-3) : 58 - 67
123