A study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys - Discussion

被引:0
作者
Raghavan, V [1 ]
Datta, R [1 ]
机构
[1] INDIA LTD R&D,STEEL AUTHOR,RANCHI 834002,BIHAR,INDIA
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1997年 / 28卷 / 03期
关键词
Martensite; Material Transaction; Lath Martensite; Transformation Start; Isothermal Mode;
D O I
10.1007/s11661-997-0058-x
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
P. Visvesvaran extended the study on the morphology and plate dimensions in Fe-Ni and Fe-Ni-Mn alloys to Fe-Ni-Cr alloys and confirmed previous experimental results on Fe-Ni alloys in his paper on `A Study on Morphology and Plate Mean Dimensions in Fe-Ni and Fe-Ni-Cr Alloys.' However, there are some serious inconsistencies in the interpretation of the results which warrant a discussion. As an example, thin-plate morphology is known to occur at very low temperatures with a fully-twinned structure and with smooth and straight boundaries, in some cases, exhibiting thermoelastic behavior. Visvesvaran overlooked the drastic change in the kinetic mode on adding Cr to Fe-Ni alloy, and that the isothermal behavior becomes dominant.
引用
收藏
页码:721 / 722
页数:2
相关论文
共 50 条
  • [21] Anomalies in the physical properties of metastable Fe-Ni alloys heated to the temperature interval of the α → γ transformation
    N. D. Zemtsova
    Technical Physics, 2014, 59 : 1150 - 1157
  • [22] Anomalies in the physical properties of metastable Fe-Ni alloys heated to the temperature interval of the α → γ transformation
    Zemtsova, N. D.
    TECHNICAL PHYSICS, 2014, 59 (08) : 1150 - 1157
  • [23] Effect of composition on the solidification behavior of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloys
    M. J. Perricone
    J. N. Dupont
    Metallurgical and Materials Transactions A, 2006, 37 : 1267 - 1280
  • [24] Study on phase transformation of Fe-Ni powders during mechanical alloying
    Li-Hui Zhu
    Xue-Ming Ma
    Ling Zhao
    Journal of Materials Science, 2001, 36 : 5571 - 5574
  • [25] Some discussion topics on the representation of the equilibrium Fe-Ni phase diagram and on the nature of the Invar effect
    Zemtsova, N. D.
    PHYSICS-USPEKHI, 2018, 61 (10) : 1000 - 1015
  • [26] The structure and properties of Fe-Ni alloys with a nanocrystalline austenite formed under different conditions of γ-α-γ transformations
    Sagaradze, VV
    Danilchenko, VE
    L'Heritier, P
    Shabashov, VA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 146 - 159
  • [27] Effect of thermal cycling on microstructures and mechanical properties of lath and lenticular martensites in Fe-Ni alloys
    Seo, SB
    Leem, DS
    Jun, JH
    Choi, CS
    ISIJ INTERNATIONAL, 2001, 41 (04) : 350 - 355
  • [28] Hindering of Martensitic transformations by mechanical alloying of Fe-Mn and Fe-Ni powders
    Pustov, LY
    Kaloshkin, SD
    Estrin, EI
    Principi, G
    Spataru, T
    Tscherdyntsev, VV
    Tomilin, IA
    Shelekhov, EV
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2003, : 221 - 226
  • [29] The thermodynamics of tetrataenite and awaruite: A review of the Fe-Ni phase diagram
    Reed A. Howald
    Metallurgical and Materials Transactions A, 2003, 34 : 1759 - 1769
  • [30] Stress-induced martensitic transformation in Fe-Ni bicrystals
    Ueda, M
    Yasuda, HY
    Umakoshi, Y
    ACTA MATERIALIA, 2001, 49 (20) : 4251 - 4258