Tribological and anti-corrosion properties of Ni-W-CeO2 coatings against molten glass

被引：52

作者：

Han, Baolei ^{[1
]}

Lu, Xinchun ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Precis Instruments & Mechanol, State Key Lab Trinbol, Beijing 100084, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 14期

基金：

中国国家自然科学基金;

关键词：

rare earth oxide; Ni-W-CeO2; composite coating; high temperature tribological properties;

D O I：

10.1016/j.surfcoat.2007.11.031

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Composite plating was used to prepare Ni-W infused rare earth oxide CeO2 composite coatings. The high temperature friction behavior and corrosion resistance of the coatings against molten glass were investigated by using a high temperature tribometer. A microhardness tester and an environmental scanning electron microscope equipped energy dispersive spectroscopy were employed to investigate the microhardness and the surface morphology of the composite coatings respectively. The results show that the brittle fracture, high temperature tribological properties and the corrosion resistance of Ni-W infused CeO2 Coatings are superior to those of a standard Ni-W coating. CeO2 particles decrease the friction coefficient from nearly 0.5 to about 0.25 during the composite coatings sliding against the molten glass at about 973 K, and proper quantities of CeO2 decrease the variation of the friction coefficient value. Furthermore, CeO(2)can improve the corrosion resistance of the Ni-W coatings at high temperature effectively. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：3251 / 3256

页数：6

共 23 条

[1] Wear corrosion properties of nano-structured SiC-nickel composite coatings obtained by electroplating [J].