Influence of propagation distance on cracking and debonding acoustic emissions in externally reinforced concrete beams

被引：10

作者：

Aggelis, D. G. ^{[1
]}

Tsangouri, E. ^{[1
]}

Van Hemelrijck, D. ^{[1
]}

机构：

[1] Vrije Univ Brussel, Dept Mech Mat & Construct, B-1050 Brussels, Belgium

来源：

MECCANICA | 2015年 / 50卷 / 05期

关键词：

Acoustic emission; Characterization; Monitoring; RA value; Frequency; CFRP strip; DAMAGE EVALUATION; NDE TECHNIQUES; CLASSIFICATION; IDENTIFICATION; RECOMMENDATION; MODE;

D O I：

10.1007/s11012-014-9900-6

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Acoustic emission (AE) data from bending of externally reinforced large scale concrete beams are presented. Emissions from concrete cracking and debonding of carbon fiber reinforced polymer strip are identified in conjunction with other nondestructive testing measurements. It is shown that although the nature of AE signals differs much depending on the actual source, any discrimination between them will not be feasible if the data are not adequately treated as to their propagation path. The reason is that frequency and other waveform characteristics of cracking AE signals start to resemble debonding ones from the external reinforcement as they propagate for additional distance. The phenomenon is verified and strategies to overcome are discussed in order to enable application of simple parameter-based criteria developed in laboratory for the crack mode characterization in large structures.

引用

页码：1167 / 1175

页数：9

共 30 条

[21]

Polyzos D., 2011, J ACOUST EMISS, V29, P57

[22] A review of recent developments in parametric based acoustic emission techniques applied to concrete structures [J].

Sagar, R. Vidya ;

Prasad, B. K. Raghu .

NONDESTRUCTIVE TESTING AND EVALUATION, 2012, 27 (01) :47-68

[23] Identification of damage mechanisms in concrete under high level creep by the acoustic emission technique [J].

Saliba, J. ;

Loukili, A. ;

Grondin, F. ;

Regoin, J. P. .

MATERIALS AND STRUCTURES, 2014, 47 (06) :1041-1053

[24] Quantitative experimental measurements of matrix cracking and delamination using acoustic emission [J].

Scholey, Jonathan J. ;

Wilcox, Paul D. ;

Wisnom, Michael R. ;

Friswell, Michael I. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (05) :612-623

[25] Damage classification in reinforced concrete beam by acoustic emission signal analysis [J].

Shahidan, Shahiron ;

Pulin, Rhys ;

Bunnori, Norazura Muhamad ;

Holford, Karen M. .

CONSTRUCTION AND BUILDING MATERIALS, 2013, 45 :78-86

[26]

Shull P.J., 2002, NONDESTRUCTIVE EVALU

[27]

Tsinopoulos SV, 2000, ADV COMPOS LETT, V9, P193

[28] Fracture mechanics of corrosion cracking in concrete by acoustic emission [J].

Uddin, Farid A. K. M. ;

Shigeishi, Mitsuhiro ;

Ohtsu, Masayasu .

MECCANICA, 2006, 41 (04) :425-442

[29] Acoustic emission analysis for the quantification of autonomous crack healing in concrete [J].

Van Tittelboom, Kim ;

De Belie, Nele ;

Lehmann, Frank ;

Grosse, Christian U. .

CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) :333-341

[30] Monitoring and predicting masonry's creep failure with the acoustic emission technique [J].

Verstrynge, Els ;

Schueremans, Luc ;

Van Gemert, Dionys ;

Wevers, Martine .

NDT & E INTERNATIONAL, 2009, 42 (06) :518-523

← 1 2 3 →