The Influence of Sheet Tilting on Forming Quality in Single Point Incremental Forming

被引：3

作者：

Zhu, Hu ^{[1
]}

Wang, Yang ^{[1
]}

Liu, Yibo ^{[2
]}

Jung, Dongwon ^{[3
]}

机构：

[1] Shenyang Aerosp Univ, Coll Mech & Elect Engn, Shenyang 110136, Peoples R China

[2] Guidaojiaotong Polytech Inst, Sci & Technol Training Ctr, Shenyang 110023, Peoples R China

[3] Jeju Natl Univ, Dept Mech Engn, Jeju Si 63243, Jeju Do, South Korea

来源：

MATERIALS | 2021年 / 14卷 / 14期

关键词：

incremental forming; single point forming; sheet tilting; forming quality; PREDICTION; DESIGN; IMPROVEMENT; STRATEGIES; COMPONENT;

D O I：

10.3390/ma14143907

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In the CNC incremental forming process, the sheet tilting method can be used to realize the non-fracture forming of a surface with large forming angles. However, the forming effect of the formed part will have big differences when the inclined angle of the sheet is different. Therefore, four different tilted sheets with inclined angles of 15 degrees, 20 degrees, 25 degrees, and 30 degrees were used to study the influence of sheet tilting on forming quality by using 1060 Aluminum sheet as the forming sheet in single point CNC incremental forming. First, the influence of four different inclined angles of the sheet on the overall thickness distribution, plastic strain, and material flow of the formed part was studied by using numerical simulation. Then, the influence of four different inclined angles of sheets on the profile accuracy and thickness thinning rate of the formed part was studied through single point incremental forming experiments. The research results show that sheet tilting has little effect on the profile accuracy of the formed part, but has a great influence on the material flow, plastic strain, and thickness distribution.

引用

页数：15

共 50 条

[11] Behaviour modelling of aluminium alloy sheet for Single Point Incremental Forming
Decultot, N.
Velay, V.
Robert, L.
Bernhart, G.
Massoni, E.
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 1151 - 1154
[12] Experimental Study on Springback of Sheet Metal Single Point Incremental Forming
LIANG Ying
International Journal of Plant Engineering and Management, 2011, 16 (01) : 60 - 64
[13] Single point incremental forming of polymers
Martins, P. A. F.
Kwiatkowski, L.
Franzen, V.
Tekkaya, A. E.
Kleiner, M.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 229 - 232
[14] Forces in single point incremental forming
Jeswiet, J
Szekeres, A
TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 399 - 404
[15] A rapid kinematic method for the prediction of sheet performance in two-point incremental sheet forming
Vodenitcharova, Tania
Daniel, William J. T.
Liu, Sheng
Meehan, Paul A.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 312
[16] TWIST IN SINGLE POINT INCREMENTAL FORMING
Asghar, Javed
Shibin, E.
Bhattacharya, A.
Reddy, N. V.
PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2012, 2012, : 243 - 247
[17] Effect of temperatures during forming in single point incremental forming
Gupta, Pranav
Jeswiet, Jacob
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12) : 3693 - 3706
[18] Parametric Investigation of Forming Forces in Single Point Incremental Forming
Kumar, Ajay
Gulati, Vishal
Kumar, Parveen
Singh, Hari
Singh, Vinay
Kumar, Sanjay
Haleem, Abid
MATERIALS TODAY-PROCEEDINGS, 2020, 24 : 611 - 617
[19] Temperature influence on Single Point Incremental Forming of PVC parts
Medina-Sanchez, G.
Torres-Jimenez, E.
Lopez-Garcia, R.
Dorado-Vicente, R.
Cazalla-Moral, R.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 335 - 342
[20] Experimental and numerical investigations in single point incremental sheet forming for micro parts
Dejardin, S.
Thibaud, S.
Gelin, J. C.
10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 145 - +

← 1 2 3 4 5 →