Evaluation on microstructure of thin strip produced by twin-roll continuous casting

被引：0
|
作者：
Zhao, HY [1 ]
Ju, DY [1 ]
Hu, L [1 ]
机构：
[1] Anshan Univ Sci & Technol, Coll Mat Engn, Anshan 114044, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2004年 / 20卷
关键词：
twin-roll; strip casting; microstructure; solidification;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The twin-roll casting (TC) process of Al alloy was presented. Microstructure and crystallization of the as-cast strip are investigated to link the strip quality and microstructure with the process conditions. The process variables of cooling rate, temperature history and solidification finish point and their influences are discussed. The results revealed the ability of the twin-roll caster to produce directly the thin strip of AI alloy with improved mechanical strength.
引用
收藏
页码：105 / 107
页数：3
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of twin-roll strip casting low carbon steel
    Institute of Research of Iron and Steel, Shasteel, Zhangjiagang, China
    不详
    Cailiao Rechuli Xuebao, 4 (168-173):
  • [32] Research on Cast-Rolling Model in Twin-roll Continuous Strip Casting
    Zhu Guangming
    Chang Zheng
    2009 INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION, VOL III, 2009, : 828 - 831
  • [33] Effect of annealing after strip casting on microstructure, precipitates and texture in non-oriented silicon steel produced by twin-roll strip casting
    Lan, Meng-Fei
    Zhang, Yuan-Xiang
    Fang, Feng
    Lu, Xiang
    Wang, Yang
    Yuan, Guo
    Cao, Guang-Ming
    Misra, R. D. K.
    Wang, Guo-Dong
    MATERIALS CHARACTERIZATION, 2018, 142 : 531 - 539
  • [34] Finite Element Modeling of Casting Roll during Twin-Roll Strip Casting
    Zhang, Xiaoming
    Jiang, Zhengyi
    Wei, Dongbin
    Liu, Xianghua
    Wang, Guodong
    ADVANCES IN ROLLING EQUIPMENT AND TECHNOLOGIES, 2011, 145 : 287 - +
  • [35] Continuous fabrication of bulk amorphous alloy sheets by twin-roll strip casting
    Lee, Jung G.
    Lee, Hakcheol
    Oh, Y. S.
    Lee, S.
    Kim, Nack J.
    INTERMETALLICS, 2006, 14 (8-9) : 987 - 993
  • [36] The future of the twin-roll strip casting and rolling process
    FANG Yuan
    ZHANG Jian
    Baosteel Technical Research, 2019, 13 (03) : 1 - 7
  • [37] Twin-roll strip casting of magnesium alloys in China
    丁培道
    潘复生
    蒋斌
    王健
    李华伦
    吴江才
    许月旺
    文钰
    TransactionsofNonferrousMetalsSocietyofChina, 2008, 18(S1) (S1) : 7 - 11
  • [38] Twin-roll strip casting of magnesium alloys in China
    National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China
    不详
    Trans Nonferrous Met Soc China, 2008, SPEC. ISSUE 1 (s7-s11):
  • [39] DYNAMIC MODELING OF TWIN-ROLL STEEL STRIP CASTING
    Browne, Florian
    Chiu, George
    Jain, Neera
    PROCEEDINGS OF THE ASME 9TH ANNUAL DYNAMIC SYSTEMS AND CONTROL CONFERENCE, 2016, VOL 2, 2017,
  • [40] Technological challenges of the twin-roll strip casting process
    Kopp, R
    Albrecht-Fruh, U
    Hentschel, L
    Rudolphi, U
    Schmitz, JW
    Senk, D
    Simon, F
    THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II, 1997, : 2201 - 2207
12345