Possibilities of failure analysis for steel cord conveyor belts using knowledge obtained from non-destructive testing of steel ropes

被引：30

作者：

Fedorko, Gabriel ^{[1
]}

Molnar, Vieroslav ^{[1
]}

Ferkova, Zelmira ^{[2
]}

Peterka, Pavel ^{[1
]}

Kresak, Jozef ^{[1
]}

Tomaskova, Marianna ^{[3
]}

机构：

[1] Tech Univ Kosice, Letna 9, Kosice 04200, Slovakia

[2] Tech Univ Kosice, Fac Elect Engn & Informat, Letna 9, Kosice 04200, Slovakia

[3] Tech Univ Kosice, Fac Mech Engn, Letna 9, Kosice 04200, Slovakia

来源：

ENGINEERING FAILURE ANALYSIS | 2016年 / 67卷

关键词：

Failure analysis; Steel rope; Steel cord conveyor belt; Non-destructive testing; FRETTING WEAR; WIRE; CORROSION; EVOLUTION; CONCRETE; FATIGUE;

D O I：

10.1016/j.engfailanal.2016.05.026

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The steel cord conveyor belts are applied in many industrial branches. Current operation of the conveyor belts is closely connected with various kinds of mechanical loading, which causes wear or gradual degradation of the conveyor belts. One of the most often occurring failures in the steel cord conveyor belts is damage of the inner steel cord carcass of the belt. However, timely identification of this undesirable process is a problematic question. There is presented in this article an innovative approach concerning application possibility of the non-destructive testing tools, namely in the area of the steel cord conveyor belts. The realised experimental measurements, together with the performed simulation processes verified an important fact that the non-destructive testing methodology, which is used for the steel wire ropes routinely, can be applied for the steel cord conveyor belts, as well. The developed simulation models are in accordance satisfyingly with the real status, which is typical for standard operation of the steel cord conveyor belts. These simulation models can be applied during the next investigation activities performed in the given research area. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：33 / 45

页数：13

共 32 条

[11]

Honus Stanislav, 2013, Applied Mechanics and Materials, V260-261, P598, DOI 10.4028/www.scientific.net/AMM.260-261.598

[12]

Husakova Nikoleta, 2014, Applied Mechanics and Materials, V683, P183, DOI 10.4028/www.scientific.net/AMM.683.183

[13] Design of modified electromagnetic main-flux for steel wire rope inspection [J].

Jonidecha, C. ;

Prateepasen, A. .

NDT & E INTERNATIONAL, 2009, 42 (01) :77-83

[14] Measurement of tight in steel ropes by a mean of thermovision [J].

Kresak, Jozef ;

Peterka, Pavel ;

Kropuch, Stanislav ;

Novak, Ladislav .

MEASUREMENT, 2014, 50 :93-98

[15]

Liu W, 2002, J MATER CIVIL ENG, V14, P217, DOI 10.1061/(ASCE)0899-1561(2002)14:3(217)

[16] Configuration optimization of magnetostrictive transducers for longitudinal guided wave inspection in seven-wire steel strands [J].

Liu, Zenghua ;

Zhao, Jichen ;

Wu, Bin ;

Zhang, Yinong ;

He, Cunfu .

NDT & E INTERNATIONAL, 2010, 43 (06) :484-492

[17] LUBRICATED FRETTING WEAR OF A HIGH-STRENGTH EUTECTOID STEEL ROPE WIRE [J].

MCCOLL, IR ;

WATERHOUSE, RB ;

HARRIS, SJ ;

TSUJIKAWA, M .

WEAR, 1995, 185 (1-2) :203-212

[18]

Michalik P., 2012, 2012 13th International Carpathian Control Conference (ICCC 2012), P480, DOI 10.1109/CarpathianCC.2012.6228691

[19] Evaluation of NDT methods for detection of prestressing steel damage at post-tensioned concrete structures [J].

Mietz, J. ;

Fischer, J. .

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2007, 58 (10) :789-794

[20]

Mironenko A, 1998, INSIGHT, V40, P395

← 1 2 3 4 →