Thermal properties of anhydride-cured bio-based epoxy blends

Epoxidized palm oil (EPO) (0-12 wt%) was added into petrochemical-based epoxy blends (diglycidyl ether of bisphenol-A (DGEBA)/cycloaliphatic epoxide resin/epoxy novolac resin) to develop a thermal curable bio-based epoxy system. The thermal behaviors of the EPO, epoxy blends (EB), and bio-based epoxy blends (EB/EPO) were characterized using differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMT) and thermo-mechanical analysis (TM). The glass transition temperature (T (g)) and storage modulus (E') of the EB/EPO system was reduced with the increasing of the EPO loading. This is attributed to the plasticizing effect of the EPO. It was found that epoxy blends with higher loading of EPO possessed higher coefficient of thermal expansion (CTE) and tan delta value. This is due to the increase of the free volume and chain flexibility in the three-dimensional network of the epoxy blends. The internal thermal stresses of the EB/EPO were decreased as the increasing loading of EPO, owing to the reduction of crosslink density, modulus of elasticity, and T (g) in the epoxy blends.