Polymer/biomass-derived biochar for use as a sorbent and electron transfer mediator in environmental applications

被引:60
作者
Oh, Seok-Young [1 ]
Seo, Yong-Deuk [1 ]
机构
[1] Univ Ulsan, Dept Civil & Environm Engn, 93 Daehak Ro, Ulsan 44610, South Korea
基金
新加坡国家研究基金会;
关键词
Co-pyrolysis; Polymer; Rice straw; Sorbent; Electron transfer mediator; CATALYTIC FAST PYROLYSIS; CO-PYROLYSIS; BIO-OIL; NITRO EXPLOSIVES; PART I; BIOMASS; WASTE; REACTOR; TEMPERATURE; SORPTION;
D O I
10.1016/j.biortech.2016.06.073
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
Co-pyrolysis of polymer and biomass wastes was investigated as a novel method for waste treatment and synthesis of enhanced biochar. Co-pyrolysis of rice straw (RS) with polypropylene (PP), polyethylene (PE) or polystyrene (PS) increased the carbon content, cation exchange capacity (CEC), surface area and pH of the biochar. As a result, the sorption of 2,4-dinitrotoluene (DNT) and Pb to polymer/RS-derived biochar was markedly enhanced. The increased aromaticity and hydrophobicity may be responsible for enhancing the DNT sorption to the polymer/RS-derived biochar. In contrast, increasing CEC, higher pH, and the newly developed surface area may account for the enhancement in Pb sorption. The addition of polymer to RS did not significantly change the catalytic role of biochar during the reduction of DNT by dithiothreitol. Our results suggest that co-pyrolysis of RS and polymer can improve the biochar properties to enhance the sorption of DNT and Pb. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:77 / 83
页数:7
相关论文
共 36 条
[1]   Pyrolysis of Mixtures of Palm Shell and Polystyrene: An Optional Method to Produce a High-Grade of Pyrolysis Oil [J].
Abnisa, Faisal ;
Daud, W. M. A. Wan ;
Sahu, J. N. .
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, 2014, 33 (03) :1026-1033
[2]   Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil properties [J].
Ates, Funda ;
Miskolczi, Norbert ;
Borsodi, Nikolett .
BIORESOURCE TECHNOLOGY, 2013, 133 :443-454
[3]   Physico-chemical properties of chars obtained in the co-pyrolysis of waste mixtures [J].
Bernardo, M. ;
Lapa, N. ;
Goncalves, M. ;
Mendes, B. ;
Pinto, F. ;
Fonseca, I. ;
Lopes, H. .
JOURNAL OF HAZARDOUS MATERIALS, 2012, 219 :196-202
[4]   Wood/plastic copyrolysis in an auger reactor: Chemical and physical analysis of the products [J].
Bhattacharya, Priyanka ;
Steele, Philip H. ;
Hassan, El Barbary M. ;
Mitchell, Brian ;
Ingram, Leonard ;
Pittman, Charles U., Jr. .
FUEL, 2009, 88 (07) :1251-1260
[5]   Co-pyrolysis of pine cone with synthetic polymers [J].
Brebu, Mihai ;
Ucar, Suat ;
Vasile, Cornelia ;
Yanik, Jale .
FUEL, 2010, 89 (08) :1911-1918
[6]   Review of fast pyrolysis of biomass and product upgrading [J].
Bridgwater, A. V. .
BIOMASS & BIOENERGY, 2012, 38 :68-94
[7]  
Cheng Y., 2012, Angew. Chem. Int. Ed, V51, P1387, DOI DOI 10.1002/ANIE.201107390
[8]   Overview of applications of biomass fast pyrolysis oil [J].
Czernik, S ;
Bridgwater, AV .
ENERGY & FUELS, 2004, 18 (02) :590-598
[9]   Effect of acidic activating agents on surface area and surface functional groups of activated carbons produced from Acacia mangium wood [J].
Danish, M. ;
Hashim, R. ;
Ibrahim, M. N. Mohamad ;
Sulaiman, O. .
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2013, 104 :418-425
[10]   H-ZSM5 Catalyzed Co-Pyrolysis of Biomass and Plastics [J].
Dorado, Christina ;
Mullen, Charles A. ;
Boateng, Akwasi A. .
ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2014, 2 (02) :301-311