Performance characterization of powder mixed wire electrical discharge machining technique for processing of Ti6Al4V alloy

Precision machining characteristics with high-dimensional accuracy make the material more adaptable towards the applications. The present study employs the powder mixed wire electrical discharge machining process to machine Ti6Al4V alloy material. In spite of limited drawbacks and enhanced output in the powder mixed wire electrical discharge machining process, the present problem has been formulated for improving the machining efficiency of Ti6Al4V. The impact of suspended powder characteristics on responses, that is, material removal rate and surface roughness, is examined throughout the process. The current investigation also focuses on the interaction effect of machining constraints along with Al2O3 abrasive mixed dielectric to achieve economical machining output for the Ti6Al4V material. An effort has been presented to obtain optimal solutions using the different methodologies, namely response surface methodology, grey relation analysis, and particle swarm optimization. The study reveals that discharge energy is deeply influenced by the peak current and pulse off time followed by powder concentration in the powder mixed wire electrical discharge machining process. The maximum material removal rate of 6.628 mm(3)/min and average surface finish of 1.386 mu m are the outcome of the present study for a set of optimal machining settings, that is, pulse off time (T-off) of 7.247 mu s, pulse on time (T-on) of 30 mu s, peak current (I-p) of 2 A, and powder concentration of 4 g/L. Finally, the proposed model has been verified that the hybrid particle swarm optimization technique has the highest adequate capability to achieve maximum output. Thus, the approach offered an enhancement on performance measures of Ti6Al4V alloy in the powder mixed wire electrical discharge machining process.