In situ composites based on blends of PEEK and thermotropic liquid crystalline polymer

被引：1

作者：

Miao, Zong Cheng ^{[1
]}

Wang, Dong ^{[2
]}

Xing, Yan ^{[3
]}

Gao, Hong ^{[3
]}

Zhang, Jingjing ^{[3
]}

机构：

[1] Xijing Univ, Dept Appl Stat & Sci, Xian, Shaanxi Provinc, Peoples R China

[2] Univ Sci & Technol Beijing, Beijing, Peoples R China

[3] China Acad Space Technol, Beijing, Peoples R China

来源：

MOLECULAR CRYSTALS AND LIQUID CRYSTALS | 2016年 / 630卷 / 01期

关键词：

In-situ Composites; thermotropic Liquid Crystalline; poly(ether ether ketone); POLYCARBONATE; BEHAVIOR; KETONE); FILMS;

D O I：

10.1080/15421406.2016.1146934

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

A series of blends were prepared by mixing pellets of the thermotropic liquid crystalline polymers (TLCP) with poly (ether ether ketone)(PEEK) in the dry state under injection mouldingmolding conditions. The mechanical properties of blends were measured, and it is proved that the mechanical properties of blends are better than those of their matrix. Compared with the thermoplastic matrix, the tensile modulus and strength of the blends increased obviously, with the addition of only 2wt% LCP. At the same time, the addition of TLCP decreased the melt viscosity of the blends.

引用

页码：139 / 143

页数：5

共 50 条

[41] Study of Compatibilized Liquid Crystalline Polymer/Cyclic Olefin Copolymer Blends
Srivastava, Sourabh
Das, Chapal Kumar
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2018, 57 (04) : 302 - 319
[42] Liquid Crystalline Polymer Blends as a Route to Self-Reinforcing Nanocomposites
Narh, Kwabena A.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (16) : 1957 - 1973
[43] Mechanical performance of ternary in situ polycarbonate poly(acrylonitrile-butadiene-styrene) liquid crystalline polymer composites
Tjong, SC
Jiang, W
JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 74 (09) : 2274 - 2282
[44] Polymer Composites Reinforced by Locking-In a Liquid-Crystalline Assembly of Cellulose Nanocrystallites
Tatsumi, Mio
Teramoto, Yoshikuni
Nishio, Yoshiyuki
BIOMACROMOLECULES, 2012, 13 (05) : 1584 - 1591
[45] Modification of rheological properties of a thermotropic liquid crystalline polymer by melt-state reactive processing
Li, Zhenpeng
Garza, Paola A. Gonzalez
Baer, Eric
Ellison, Christopher J.
POLYMER, 2012, 53 (15) : 3245 - 3252
[46] Study of In-situ Hybrid Composites of Poly (ethylene terephthalate)/Liquid Crystalline Polymer Filled with Microwave-synthesized Zinc Oxide Powder
Pisitsak, Penwisa
Magaraphan, Rathanawan
CHIANG MAI JOURNAL OF SCIENCE, 2014, 41 (5.2): : 1317 - 1331
[47] Enhanced Wear Performance of Nylon 6/Organoclay Nanocomposite by Blending With a Thermotropic Liquid Crystalline Polymer
Zhang, Baoqing
Wong, Julia Shuk-Ping
Yam, Richard Ching-Man
Li, Robert Kwok-Yiu
POLYMER ENGINEERING AND SCIENCE, 2010, 50 (05) : 900 - 910
[48] Structure, morphology, mechanical and thermal characteristics of the in situ composites based on liquid crystalline polymers and thermoplastics
Tjong, SC
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2003, 41 (1-2) : 1 - 60
[49] Warpage analysis of a micro-molded parts prepared with liquid crystalline polymer based composites
Oh, Hwa Jin
Lee, Doo Jin
Lee, Chae Gyu
Jo, Ki Yeon
Lee, Dong Hyun
Song, Young Seok
Youn, Jae Ryoun
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 53 : 34 - 45
[50] PET in situ composites improved both flame retardancy and mechanical properties by phosphorus-containing thermotropic liquid crystalline copolyester with aromatic ether moiety
Chen, Li
Bian, Xiang-Cheng
Yang, Rong
Wang, Yu-Zhong
COMPOSITES SCIENCE AND TECHNOLOGY, 2012, 72 (06) : 649 - 655

← 1 2 3 4 5 →