In situ composites based on blends of PEEK and thermotropic liquid crystalline polymer

被引：1

作者：

Miao, Zong Cheng ^{[1
]}

Wang, Dong ^{[2
]}

Xing, Yan ^{[3
]}

Gao, Hong ^{[3
]}

Zhang, Jingjing ^{[3
]}

机构：

[1] Xijing Univ, Dept Appl Stat & Sci, Xian, Shaanxi Provinc, Peoples R China

[2] Univ Sci & Technol Beijing, Beijing, Peoples R China

[3] China Acad Space Technol, Beijing, Peoples R China

来源：

MOLECULAR CRYSTALS AND LIQUID CRYSTALS | 2016年 / 630卷 / 01期

关键词：

In-situ Composites; thermotropic Liquid Crystalline; poly(ether ether ketone); POLYCARBONATE; BEHAVIOR; KETONE); FILMS;

D O I：

10.1080/15421406.2016.1146934

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

A series of blends were prepared by mixing pellets of the thermotropic liquid crystalline polymers (TLCP) with poly (ether ether ketone)(PEEK) in the dry state under injection mouldingmolding conditions. The mechanical properties of blends were measured, and it is proved that the mechanical properties of blends are better than those of their matrix. Compared with the thermoplastic matrix, the tensile modulus and strength of the blends increased obviously, with the addition of only 2wt% LCP. At the same time, the addition of TLCP decreased the melt viscosity of the blends.

引用

页码：139 / 143

页数：5

共 50 条

[1] Tribological behavior of polyetheretherketone, a thermotropic liquid crystalline polymer and in situ composites based on their blends under dry sliding conditions at elevated temperatures
Hanchi, J
Eiss, NS
WEAR, 1996, 200 (1-2) : 105 - 121
[2] Properties of blends of polycarbonate and a thermotropic liquid crystalline polymer
Lee, HS
Jung, WH
Jung, HW
Kim, WN
Hyun, JC
POLYMER-KOREA, 1996, 20 (05) : 813 - 822
[3] Crystallization Behavior of Thermotropic Liquid Crystalline Polymer Reinforced Polyamide 66 in situ Composites
Yue, Qunfeng
Zhu, Chuncheng
Yang, Shengrong
POLYMERS & POLYMER COMPOSITES, 2014, 22 (03) : 241 - 246
[4] A new method of preparing in situ composites based on thermotropic liquid crystalline polymers and thermoplastics
Yang, Gao-pin
Ding, Yu-mei
Yang, Wei-min
AICAM 2005, 2006, 11-12 : 445 - +
[5] Morphology, crystallization and melting behaviour of poly(trimethylene terephthalate)/thermotropic liquid crystalline polymer blends
Deshpande, Vineeta Dinesh
Jape, Sandeep Padmakar
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2017, 128 (03) : 1479 - 1493
[6] The morphology and properties of ternary blends of polyamides, a thermotropic liquid crystalline polymer and a compatibilizer
Seo, Y
Kim, B
Hwang, SS
Hong, SM
Kim, KU
COMPOSITE INTERFACES, 2000, 7 (03) : 203 - 213
[7] THERMAL-PROPERTIES OF THERMOTROPIC LIQUID-CRYSTALLINE POLYMER POLYCARBONATE BLENDS
WON, HJ
HYUN, Y
ICK, HK
TAE, WS
POLYMER JOURNAL, 1992, 24 (06) : 519 - 526
[8] Extrusion Blow Molding of Polymeric Blends Based on Thermotropic Liquid Crystalline Polymer and High Density Polyethylene
Qian, C.
Mansfield, C. D.
Baird, D. G.
INTERNATIONAL POLYMER PROCESSING, 2017, 32 (01) : 112 - 120
[9] MECHANICAL-PROPERTIES OF IN-SITU COMPOSITES BASED ON POLYCARBONATE AND A LIQUID-CRYSTALLINE POLYMER
LIN, QH
YEE, AF
POLYMER, 1994, 35 (16) : 3463 - 3469
[10] Self-reinforcing elastomer composites based on polyolefinic thermoplastic elastomer and thermotropic liquid crystalline polymer
Saikrasun, Sunan
Amornsakchai, Taweechai
JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 107 (04) : 2375 - 2384

← 1 2 3 4 5 →