Heat treatment of multi-element low alloy wear-resistant steel

被引：53
作者：
Fu, HG
Xiao, Q
Fu, HF
机构：
[1] Univ Wyoming, Dept Engn Mech, Laramie, WY 82071 USA
[2] Tsing Hua Univ, Dept Engn Mech, Beijing 100084, Peoples R China
[3] Shanghai Baoshan Iron & Steel Grp Corp, Mfg Steel Plant 1, Shanghai 201900, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 396卷 / 1-2期
关键词：
rolling mill torii; liner; heat treatment; mechanical performances; wear resistance;
D O I：
10.1016/j.msea.2005.01.023
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effect of heat treatment on the performances of multi-element low alloy wear-resistant steel (MLAWS), which is used to make the rolling mill torii liner, was investigated. The results show that the hardness and tensile strength increase as the quenching temperature is increased from 840 to 900 degrees C. However, the hardness decreases rapidly as the quenching temperature is increased beyond 900 degrees C, while the temperature has little influence on the tensile strength when it exceeds 900 degrees C. No clear influence on the impact toughness has been observed unless the quenching temperature is beyond 920 degrees C. As the tempering temperature exceeds 300 degrees C, tiny epsilon carbides separate out from martensite and bainite complex structures and cause the carbon content in the complex structures to decrease. This results in the toughness to increase significantly. The best wear resistance can be obtained by tempering at 350 degrees C. The optimum heat treatment of MLAWS comprises quenching at 900-920 degrees C and tempering at 350-370 degrees C. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：206 / 212
页数：7
相关论文
共 38 条
[1]  
Anelli E, 2003, MODELING, CONTROL AND OPTIMIZATION IN FERROUS AND NONFERROUS INDUSTRY, P453
[2]  
AUBRY C, 1999, METALL ITAL, V91, P33
[3]  
[白清顺 Bai Qingshun], 2003, [摩擦学学报, Tribology], V23, P81
[4]  
BRUNZEL YM, 1993, METALLOVEDENIE TERMI, V10, P10
[5]  
[曹芬 Cao Fen], 2003, [金属热处理, Heat treatment of metals], V28, P24
[6]  
CUI XH, 2000, ACTA METALL SIN, V13, P1053
[7]  
[张占平 Zhang Zhanping], 2004, [金属热处理, Heat treatment of metals], V29, P27
[8]  
Dai P.Q., 1998, HEAT TREAT MET, V12, P19
[9]  
DAVIS CL, 1993, MATER SCI TECH SER, V9, P8, DOI 10.1179/026708393790171494
[10]  
DE SF, 1984, METALURGIJA, V40, P195
1234