The testing device design of a small flyer initiating explosive

被引：0

作者：

Tan, YX ^{[1
]}

Wang, YX ^{[1
]}

Zhang, JL ^{[1
]}

机构：

[1] N Univ China, Dept Environm & Safety Engn, Taiyuan 030051, Shanxi, Peoples R China

来源：

ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings | 2005年

关键词：

flyer; explosive; testing device;

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The test device and test principle of a small flyer initiating system are described. The device is based on a metal foil exploding to drive flyer to initiate a desensitized explosive pallor For the testing equipment, it has been considered that the charge voltages must can be adjusted continuously in a large range. The volume of small flyer initiator must as soon as possible small. This has been first come true. Now the voltage range of the small flyer initiator is 1500 similar to 15000 V The diameter of flyer is 1mm. The size of whole flyer initiator is Phi 5X3mm. The flyer sensitivity of HMX was tested. The test results show that the test method and the test device more suit to initiate the fine-grained desensitized explosive.

引用

页码：9247 / 9249

页数：3

共 50 条

[21] Design of special device for transporting primary explosive powder
Huang, P
Shang, HZ
THEORY AND PRACTICE OF ENERGETIC MATERIALS, VOL 5, PARTS A AND B, 2003, : 949 - 952
[22] Effect of metal explosion foil on results of flyer initiating explosives
Tan, YX
Wang, YX
Tan, LX
Theory and Practice of Energetic Materials, Vol 6, 2005, : 598 - 602
[23] Flyer plate velocity in explosive welding under the critical conditions
Wang, Zhiping
He, Zhi
Fu, Minglin
Liu, Shu
1996, Chinese Journal of High Pressure Physics, Chengdu, China (10):
[24] Discharge characteristics of ferroelectric ceramics explosive to electrical transducer impacted by explosive-driven flyer
Gu, L. (gulin_110@163.com), 1600, Explosion and Shock Waves (33):
[25] Design and explosive testing of a blast resistant luggage container
Fleisher, HJ
STRUCTURES UNDER SHOCK AND IMPACT IV, 1996, : 51 - 60
[26] Design of a sensor for testing the gap at the bottom of an explosive charge
Meng, LF
Liang, WH
Hou, W
ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings, 2005, : 3619 - 3622
[27] Modeling a Small Punch Testing Device
Habibi, Samir
Ziadi, Abdelkader
Megueni, Abdelkader
ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2014, 4 (02) : 612 - 617
[28] DEVICE FOR TESTING SMALL FLAT SPRINGS
BOBROV, AG
INDUSTRIAL LABORATORY, 1961, 27 (03): : 349 - 350
[29] A NOTE ON THE ESTIMATION OF FLYER-PLATE VELOCITY IN EXPLOSIVE CLADDING
VAIDYANATHAN, PV
RATHINASABAPATHI, M
RAMANATHAN, AR
JOURNAL OF MECHANICAL WORKING TECHNOLOGY, 1989, 18 (03): : 343 - 350
[30] A New Method to Evaluate the Adaptability of Initiating Explosive Used in the Aro-Pyrotechnic Device in Deep Space
Ye, Yaokun
Ding, Feng
Man, Jianfeng
Yan, Nan
Li, Weituo
PROTECTION OF MATERIALS AND STRUCTURES FROM THE SPACE ENVIRONMENT, ICPMSE-11, 2017, 47 : 587 - 594

← 1 2 3 4 5 →