Analysis of the Elasto-Plastic Behavior of SAE 1045 Steel Submitted to Cyclic Loads

被引：0

作者：

Cordeiro, Matheus Henriques ^{[1
]}

Souza, Victor Barbosa ^{[1
]}

Lima, Amanda Camerini ^{[1
]}

Cerqueira, Niander Aguiar ^{[1
]}

机构：

[1] REDENTOR Soc Univ Redentor, BR 356 Km 25, Rio De Janeiro, Brazil

来源：

CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2021 | 2021年

关键词：

Characterization; Mechanical properties; Cyclic loads; Elasto-plasticity;

D O I：

10.1007/978-3-030-65493-1_6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work proposes an elasto-plastic study of SAE 1045 steel through a stress versus cyclic deformation curve, which was the basis for calculating the material's hardening parameters, defining the isotropic hardening value as null and kinematic hardening value as 415.05 MPa. Therefore, due to the wide use of SAE 1045 steel in structures and elements that undergo cyclical stresses, the parameters defined in the present work are highly relevant for the analysis of structures based on this material, making it easier to meet the needs during research, diagnostics, or sizing using this steel. The mathematical model used proved to be efficient in generating results compatible with those expected based on the bibliography.

引用

页码：57 / 67

页数：11

共 50 条

[1] Elasto-plastic singular behavior at an interface edge
Xu, JQ
Mutoh, Y
Fu, LD
ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2, 2004, 274-276 : 607 - 612
[2] Indentation behavior of highly confined elasto-plastic materials
Linder, David
Walbruhl, Martin
Agren, John
Borgenstam, Annika
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2020, 193 : 69 - 78
[3] An elasto-plastic model to describe the undrained cyclic behavior of saturated sand with initial static shear
Chiaro, G.
De Silva, L. I. N.
Kiyota, T.
Koseki, J.
DEFORMATION CHARACTERISTICS OF GEOMATERIALS, PTS 1 AND 2, 2011, : 1026 - 1033
[4] On the elasto-plastic behavior of CNT-polymer nanocomposites
Karimi, Majid
Montazeri, Abbas
Ghajar, Rahmatollah
COMPOSITE STRUCTURES, 2017, 160 : 782 - 791
[5] Elasto-plastic analysis of influences of bond deformability on the mechanical behavior of fiber networks
Liu, J. X.
Chen, Z. T.
Wang, H.
Li, K. C.
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2011, 55 (02) : 131 - 139
[6] Numerical Simulation of Elasto-Plastic Behavior of Isotropic Composite Materials
Karvatskii, Anton
Mikulionok, Ihor
Leleka, Serhii
Solovei, Vladyslav
ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1, 2020, : 492 - 501
[7] Adaptive integration in elasto-plastic boundary element analysis
Gao, XW
Davies, TG
JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2000, 23 (03) : 349 - 356
[8] FEM formulation and analysis of elasto-plastic stress singularity
Attaporn, Wisessint
Koguchi, Hideo
FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 915 - +
[9] Elasto-plastic instability of steel compression tubular members subjected to cyclically applied bi-directional horizontal loads
Watanabe, E
Sugiura, K
Oyawa, WO
THIN-WALLED STRUCTURES: RESEARCH AND DEVELOPMENT, 1998, : 809 - 816
[10] Mesoscale simulation research on the homogenized elasto-plastic behavior of FeCrAl alloys
Zhang, Jingyu
Ding, Shurong
MATERIALS TODAY COMMUNICATIONS, 2020, 22

← 1 2 3 4 5 →