The dual actions of modified polybenzimidazole in taming the polysulfide shuttle for long-life lithium-sulfur batteries

被引:62
作者
Li, Gaoran [1 ]
Wang, Can [1 ]
Cai, Wenlong [2 ]
Lin, Zhan [1 ]
Li, Zhoupeng [1 ]
Zhang, Shanqing [3 ,4 ]
机构
[1] Zhejiang Univ, Coll Chem & Biol Engn, 38 Zheda Rd, Hangzhou 310027, Zhejiang, Peoples R China
[2] Univ Sci & Technol China, Hefei Natl Lab Phys Sci Microscale, Dept Chem, Hefei, Peoples R China
[3] Griffith Univ, Environm Futures Res Inst, Ctr Clean Environm & Energy, Nathan, Qld, Australia
[4] Griffith Univ, Griffith Sch Environm, Nathan, Qld, Australia
基金
中国国家自然科学基金; 美国国家科学基金会;
关键词
MEMBRANE FUEL-CELLS; ION BATTERIES; BINDER; ELECTROLYTE; COMPOSITE; CATHODES; POLYMER; CHALLENGES; GRAPHENE; NITROGEN;
D O I
10.1038/am.2016.138
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The development of lithium-sulfur (Li-S) batteries is of practical significance to meet the rapidly escalating demand for advanced energy storage technologies with long life and high-energy density. However, the dissolution and shuttling of the intermediate polysulfides (PS) initiates the loss of active sulfur and the poisoning of the lithium anode, leading to unsatisfactory cyclability and consequently hinders the commercialization of Li-S batteries. Herein, we develop a facile strategy to tame the PS dissolution and the shuttling effect in the Li-S system by introducing a modified polybenzimidazole (mPBI) with multiple functions. As a binder, the excellent mechanical property of mPBI endows the sulfur electrode with strong integrity and, therefore, results in high sulfur loading (7.2 mg cm(-2)), whereas the abundant chemical interaction between mPBI and PS affords efficient PS adsorption to inhibit sulfur loss and prolong battery life. As a functional agent for the separator, the mPBI builds a PS shield onto the separator to block PS's migration to further suppress the PS shuttling. The dual actions of mPBI confer an excellent performance of 750 mAh g(-1) (or 5.2 mAh cm(-2)) after 500 cycles at C/5 on the Li-S battery with an ultralow capacity fading rate of 0.08% per cycle.
引用
收藏
页码:e317 / e317
页数:8
相关论文
共 43 条
  • [1] Bruce PG, 2012, NAT MATER, V11, P19, DOI [10.1038/nmat3191, 10.1038/NMAT3191]
  • [2] A novel laminated separator with multi functions for high-rate dischargeable lithium-sulfur batteries
    Cai, Wenlong
    Li, Gaoran
    He, Fan
    Jin, Liming
    Liu, Binhong
    Li, Zhoupeng
    [J]. JOURNAL OF POWER SOURCES, 2015, 283 : 524 - 529
  • [3] The Mechanical Property, Microstructure, and Pore Geometry of a Methyltrimethoxysilane Modified Silica Zeolite (MSZ) Film
    Che, Mu-Lung
    Chuang, Shindy
    Leu, Jihperng
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2012, 159 (03) : G23 - G28
  • [4] Opportunities and challenges for a sustainable energy future
    Chu, Steven
    Majumdar, Arun
    [J]. NATURE, 2012, 488 (7411) : 294 - 303
  • [5] Chung TS, 1997, J MACROMOL SCI R M C, VC37, P277
  • [6] Electrical Energy Storage for the Grid: A Battery of Choices
    Dunn, Bruce
    Kamath, Haresh
    Tarascon, Jean-Marie
    [J]. SCIENCE, 2011, 334 (6058) : 928 - 935
  • [7] New Approaches for High Energy Density Lithium-Sulfur Battery Cathodes
    Evers, Scott
    Nazar, Linda F.
    [J]. ACCOUNTS OF CHEMICAL RESEARCH, 2013, 46 (05) : 1135 - 1143
  • [8] Supramolecular Perylene Bisimide-Polysulfide Gel Networks as Nanostructured Redox Mediators in Dissolved Polysulfide Lithium-Sulfur Batteries
    Frischmann, Peter D.
    Gerber, Laura C. H.
    Doris, Sean E.
    Tsai, Erica Y.
    Fan, Frank Y.
    Qu, Xiaohui
    Jain, Anubhav
    Persson, Kristin A.
    Chiang, Yet-Ming
    Helms, Brett A.
    [J]. CHEMISTRY OF MATERIALS, 2015, 27 (19) : 6765 - 6770
  • [9] Challenges for Rechargeable Li Batteries
    Goodenough, John B.
    Kim, Youngsik
    [J]. CHEMISTRY OF MATERIALS, 2010, 22 (03) : 587 - 603
  • [10] Mechanical properties and bonding of maxillofacial silicone elastomers
    Hatamleh, Muhanad M.
    Watts, David C.
    [J]. DENTAL MATERIALS, 2010, 26 (02) : 185 - 191