A study of hot compression behavior of an as-cast FeCrCuNi2Mn2 high-entropy alloy

被引:16
|
作者
Sajadi, Seyyed Ali [1 ]
Toroghinejad, Mohammad Reza [1 ,2 ]
Rezaeian, Ahmad [1 ]
Ebrahimi, Gholam Reza [3 ]
机构
[1] Isfahan Univ Technol, Dept Mat Engn, Esfahan 8415683111, Iran
[2] Shahid Beheshti Univ, Fac Mech & Energy Engn, Tehran, Iran
[3] Ferdowsi Univ Mashhad, Mat & Met Engn Dept, Mashhad, Razavi Khorasan, Iran
关键词
FeCrCuNi2Mn2 high-entropy alloy; hot compression; Constitutive modeling; dynamic recrystallization; work hardening rate; microstructure; DEFORMATION-BEHAVIOR; DYNAMIC RECRYSTALLIZATION; CONSTITUTIVE ANALYSIS; PROCESSING MAPS; FLOW;
D O I
10.1016/j.jallcom.2021.162732
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this study, hot deformation behavior of an as-cast FeCrCuNi2Mn2 high-entropy alloy (HEA) was evaluated. For this purpose, hot compression tests were carried out in the temperature range of 600-1000 degrees C and initial strain rate range of 0.001-0.1 s(-1). Flow stresses under different deformation conditions were then friction-corrected. Work hardening rate analysis was used to evaluate the occurrence of dynamic re crystallization. Microstructures of the hot compressed specimens were characterized using optical microscopy. Strain-dependent constitutive equations were developed using the data obtained from the Sellars-Tegart-Garofalo equation. The critical and peak strain and the critical and peak stress, as dynamic recrystallization parameters, were extracted from the work hardening rate versus stress curves. The results indicated that the modeled flow stresses were generally lower than the measured ones, which could be attributed to the impact of friction on the flow stress. Microstructural observations after hot compression tests as well as evaluation of work hardening rate versus stress curves showed typical dynamic re crystallization characteristics under different deformation conditions. In addition, with increase in deformation temperature and decrease in strain rate, more DRX grains were formed along grain boundaries and shear bands, resulting in a decrease in the flow stress. The size of the DRX grains was strongly affected by deformation temperature and increased with increase in temperature. The normalized critical stress and strain for the initiation of DRX were calculated as epsilon(c)/epsilon(p) = 0.60 and sigma c/sigma p = 0.86, respectively. The activation energy of hot deformation was determined to be 708 kJ/mol. It was noticed that the developed constitutive equations could accurately predict the flow stress behavior of the studied alloy over a wide range of experimental conditions. (C) 2021 Elsevier B.V. All rights reserved.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Constitutive and Artificial Neural Network Modeling to Predict Hot Deformation Behavior of CoFeMnNiTi Eutectic High-Entropy Alloy
    Jain, Reliance
    Umre, Priyanka
    Sabat, Rama Krushna
    Kumar, Vinod
    Samal, Sumanta
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (10) : 8124 - 8135
  • [32] A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures
    Wang, Mingliang
    Lu, Yiping
    Wang, Tongmin
    Zhang, Chuan
    Cao, Zhiqiang
    Li, Tingju
    Liaw, Peter K.
    SCRIPTA MATERIALIA, 2021, 204 (204)
  • [33] Corrosion resistance mechanism of the passive films formed on as-cast FeCoCrNiMn high-entropy alloy
    Lv, Jinlong
    Jin, Huijin
    MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
  • [34] Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon
    Yi-Tao Wang
    Jian-Bo Li
    Yun-Chang Xin
    Xian-Hua Chen
    Muhammad Rashad
    Bin Liu
    Yong Liu
    Acta Metallurgica Sinica(English Letters), 2019, 32 (08) : 932 - 943
  • [35] Effects of Cu additions on microstructure and mechanical properties of as-cast CrFeCoNiCux high-entropy alloy
    Hu, Qiang
    Wang, Hai-ling
    Qian, Li-hua
    Zeng, Liang-cai
    Wang, Qiang
    Liu, Xin-wang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2023, 33 (06) : 1803 - 1813
  • [36] Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon
    Yi-Tao Wang
    Jian-Bo Li
    Yun-Chang Xin
    Xian-Hua Chen
    Muhammad Rashad
    Bin Liu
    Yong Liu
    Acta Metallurgica Sinica (English Letters), 2019, 32 : 932 - 943
  • [37] High Strength-Ductility Synergy of As-Cast B2-Containing AlNbTaTiZr Refractory High-Entropy Alloy Under Intermediate and Dynamic Strain Rates
    Naseer, Hashim
    Wang, Yangwei
    Khan, Muhammad Abubaker
    Brechtl, Jamieson
    Afifi, Mohamed A.
    METALS, 2025, 15 (03)
  • [38] Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy
    Jiang, Hui
    Qiao, Dongxu
    Jiao, Wenna
    Han, Kaiming
    Lu, Yiping
    Liaw, Peter K.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 61 : 119 - 124
  • [39] Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy
    Chu, Fuben
    Tang, Zhengyou
    You, Zeyu
    Zhao, Li
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (02) : 841 - 853
  • [40] Comparative Study of Hot Deformation Behavior and Microstructure Evolution of As-Cast and Extruded WE43 Magnesium Alloy
    Kang, Yuehua
    Huang, Zhenghua
    Zhao, Hu
    Gan, Chunlei
    Zhou, Nan
    Zheng, Kaihong
    Zhang, Jing
    Pan, Fusheng
    Huang, J. C.
    Wang, Shuncheng
    METALS, 2020, 10 (04)