Experimental models coupled optimal design of multi-blade sawing with diamond abrasive tools

被引：1

作者：

Yu, YQ ^{[1
]}

He, JC ^{[1
]}

Xu, XP ^{[1
]}

机构：

[1] Natl Huaqiao Univ, Dept Engn Mech, Fujian, Peoples R China

来源：

ADVANCES IN ABRASIVE PROCESSES | 2001年 / 202-2卷

关键词：

multi-blade sawing; diamond; granite; optimization; model;

D O I：

10.4028/www.scientific.net/KEM.202-203.203

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An investigation is reported of the optimal design of multi-blade sawing based on experimental models. Prevailing wear of diamonds in multi-blade sawing was discussed and it was found that premature pop-out of diamonds was the main obstacle to control machining cost. Coupled with our fundamental studies on machining of granites, models related to the mechanical and thermal aspects in circular sawing were summarized. Based on balancing the mechanical and thermal loads on diamonds, the multi-blade sawing was optimized by selecting of optimal parameters and designing multi-layer segment structures.

引用

页码：203 / 210

页数：8

共 50 条

[41] Structure design of low-frequency broadband sound-absorbing volute for a multi-blade centrifugal fan
Wang, Chen
Wang, Minqing
Mai, Kai
Li, Heyuan
Liu, Naitong
APPLIED ACOUSTICS, 2020, 165
[42] Design by theoretical and CFD analyses of a multi-blade screw pump evolving liquid lead for a Generation IV LFR
Ferrini, Marcello
Borreani, Walter
Lomonaco, Guglielmo
Magugliani, Fabrizio
NUCLEAR ENGINEERING AND DESIGN, 2016, 297 : 276 - 290
[43] The experimental research on small hole machining in glass using diamond abrasive core-tools
Quan, Yanming
Liang, Liang
Zhong, Wenwang
ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 491 - 496
[44] Experimental study on abrasive water-jet polishing of cemented carbide and polycrystalline diamond tools
Puoza J.C.
International Journal of Abrasive Technology, 2019, 9 (03): : 200 - 220
[45] Optimal propeller blade design, computation, manufacturing and experimental testing
Kovacevic, Aleksandar
Svorcan, Jelena
Hasan, Mohammad Sakib
Ivanov, Toni
Jovanovic, Miroslav
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2021, 93 (08): : 1323 - 1332
[46] An Experimental Study on the Precision Abrasive Machining Process of Hard and Brittle Materials with Ultraviolet-Resin Bond Diamond Abrasive Tools
Guo, Lei
Zhang, Xinrong
Chen, Shibin
Hui, Jizhuang
MATERIALS, 2019, 12 (01)
[47] EXPERIMENTAL STUDY ON THE AERODYNAMIC PERFORMANCE OF MULTI-BLADE BLOWERS - (2ND REPORT, PREDICTION OF THE SHAFT POWER).
Yamazaki, Susumu
Satoh, Ryohji
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1987, 53 (485): : 108 - 113
[48] Optimal design and experimental validation of ultrasonic wide blade horn
Afshari, Mehran
Arezoo, Behrooz
APPLIED ACOUSTICS, 2021, 182
[49] Principles of equal strength and self sharpening as criteria for the optimal design of blade tools
Petrushin, S. I.
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2006, (02): : 15 - 16
[50] OPTIMAL EXPERIMENTAL-DESIGN FOR NONLINEAR MODELS
HAINES, LM
SOUTH AFRICAN STATISTICAL JOURNAL, 1984, 18 (02) : 189 - 189

← 1 2 3 4 5 →