Electrospun gold nanofiber electrodes for biosensors

A new form of high surface area bioelectrode, based on nanofibers of electrospun gold with immobilized fructose dehydrogenase, was developed. The gold fibers were prepared by electroless deposition of gold nanoparticles on an electrospun poly(acrylonitrile)-HAuCl4 fiber. The material was characterized using electron microscopy, XRD and BET, as well as cyclic voltammetry and biochemical assay of the immobilized enzyme. The electrochemical surface area of the gold microfibers was 0.32 +/- 0.04 m(2)/g. Fructose dehydrogenase was covalently coupled to the gold surface through glutaraldehyde crosslinks to a cystamine monolayer. The enzyme exhibited mediated electron transfer directly to the gold electrode and catalytic currents characteristic of fructose oxidation in the presence of a ferrocene methanol mediator were observed. The limit of detection of fructose was 11.7 mu M and the K-M of the immobilized enzyme was 5 mM. The microfiber electrode was stable over 20 cycles with a 3.05% standard deviation. The response time of the sensor was less than 2.2 s and reached half maximum value within 3.6 s. The sensor was proven to be accurate and precise in both serum and popular beverages sweetened with high fructose corn syrup. The addition of glucose isomerase enabled the sensor to perform with glucose, thus expanding the available analyte selection for the sensor. (C) 2010 Elsevier B.V. All rights reserved.