On the accuracy of measurement and calibration of load signal in the instrumented Charpy impact test

被引：3

作者：

Kobayashi, T ^{[1
]}

Inoue, N ^{[1
]}

Morita, S ^{[1
]}

Toda, H ^{[1
]}

机构：

[1] Toyohashi Univ Technol, Toyohashi, Aichi 4418580, Japan

来源：

PENDULUM IMPACT TESTING: A CENTURY OF PROGRESS | 2000年 / 1380期

关键词：

load calibration; instrumented Charpy impact test; fracture toughness; finite element analysis;

D O I：

10.1520/STP14395S

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Significant variation in measured load of an instrumented Charpy impact test is observed if specimen materials or sizes are changed from the standard specimen. Load calibration factors for different materials and sizes of specimens are evaluated by means of both experiments and finite element analysis. Elastic finite element analysis shows that the strain fields in the instrumented striker in contact with different materials and sizes of specimens are not exactly the same as those for the standard specimen. As a result of experiment and analysis, the decrease in stiffness or size of specimens results in a decrease in the calibration factor. Those are attributable to strain localization near the region in which the strain gage is attached. Therefore, the measured load for low-stiffness materials or miniaturized specimens is overestimated when the decrease of calibration factor is disregarded. Those results strongly suggest that the system must be calibrated for the different materials and sizes of specimens to obtain accurate toughness data.

引用

页码：198 / 209

页数：12

共 48 条

[11] Revealing impact failure behavior of tungsten composite using instrumented Charpy impact testing [J].

Zhu, Wentan ;

Liu, Wensheng ;

Ma, Yunzhu ;

Meng, Shangru ;

Wang, Jianning ;

Duan, Youteng ;

Cai, Qingshan .

MATERIALS CHARACTERIZATION, 2022, 192

[12] Direct measurement of reactor pressure vessel steels fracture toughness:: Master Curve concept and instrumented Charpy-V test [J].

Serrano, M ;

Perosanz, FJ ;

Lapeña, J .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2000, 77 (10) :605-612

[13] Design Optimization of Instrumented Strikers for Charpy V-Notch Pendulum Impact Testing [J].

Schuurmans, Johan .

JOURNAL OF TESTING AND EVALUATION, 2021, 49 (03) :1613-1630

[14] STUDY OF A METHOD FOR DETERMINING THE FRACTURE TOUGHNESS OF PIPE STEEL BASED ON INSTRUMENTED CHARPY IMPACT TESTING [J].

Zhao Yatong ;

Shuai Jian ;

Shi Lei ;

Huang Zijian ;

Chen Zhanfeng .

PROCEEDINGS OF ASME 2022 PRESSURE VESSELS AND PIPING CONFERENCE, PVP2022, VOL 4A, 2022,

[15] Development of a method for extracting fracture toughness from instrumented Charpy impact tests in the ductile and transition regimes [J].

Chaouadi, R. ;

Gerard, R. .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 115

[16] An Instrumented Indentation Method for Young’s Modulus Measurement with Accuracy Estimation [J].

D. Ma ;

C. W. Ong ;

T. Zhang .

Experimental Mechanics, 2009, 49 :719-729

[17] An Instrumented Indentation Method for Young's Modulus Measurement with Accuracy Estimation [J].

Ma, D. ;

Ong, C. W. ;

Zhang, T. .

EXPERIMENTAL MECHANICS, 2009, 49 (05) :719-729

[18] Fracture toughness evaluation for dissimilar steel joints by Charpy impact test [J].

Yasuhito Takashima ;

Yusuke Ito ;

Fenggui Lu ;

Fumiyoshi Minami .

Welding in the World, 2019, 63 :1243-1254

[19] Fracture toughness evaluation for dissimilar steel joints by Charpy impact test [J].

Takashima, Yasuhito ;

Ito, Yusuke ;

Lu, Fenggui ;

Minami, Fumiyoshi .

WELDING IN THE WORLD, 2019, 63 (05) :1243-1254

[20] Dynamic modeling of particle reinforced composites and its Charpy impact test verification [J].

Miao, Wencheng ;

Xin, Zhenyang ;

Qin, Yang ;

Wang, Yue ;

Chen, Huahui .

MATERIALS TODAY COMMUNICATIONS, 2022, 30

← 1 2 3 4 5 →