High cycle fatigue behavior of thermally oxidized Ti6Al4V alloy

被引：5
作者：
Cingi, Mehmet [1 ]
Meydanoglu, Onur [1 ]
Guleryuz, Hasan [1 ]
Baydogan, Murat [1 ]
Cimenoglu, Huseyin [1 ]
Kayali, E. Sabri [1 ]
机构：
[1] Istanbul Tech Univ, Dept Met & Mat Engn, TR-34469 Istanbul, Turkey
来源：
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 | 2007年 / 561-565卷
关键词：
fatigue; thermal oxidation; titanium; oxidation;
D O I：
10.4028/www.scientific.net/MSF.561-565.2179
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, the effect of thermal oxidation on the high cycle rotating bending fatigue behavior of Ti6Al4V alloy was investigated. Oxidation, which was performed at 600 degrees C for 60 h in air, considerably improved the surface hardness and particularly the yield strength of the alloy without scarifying the tensile ductility. Unfortunately, the rotating bending fatigue strength at 5x10(6) cycles decreased from about 610 MPa to about 400 MPa upon oxidation. Thus, thermal oxidation leaded a reduction in the fatigue strength of around 34%, while improving the surface hardness (HV0.1) and yield strength 85% and 36%, respectively.
引用
收藏
页码：2179 / 2182
页数：4
相关论文
共 50 条
  • [21] Effect of microstructure on high cycle fatigue behavior of Ti-20Zr-6.5Al-4V alloy
    Yue, Y.
    Dai, L. Y.
    Zhong, H.
    Zhang, X. Y.
    Liang, S. X.
    Ma, M. Z.
    Liu, R. P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 696 : 663 - 669
  • [22] High layer thickness laser directed energy deposition of Ti6Al4V alloy: Microstructure, fatigue behavior and fractography
    Singh, Sapam Ningthemba
    Deoghare, Ashish B.
    ENGINEERING FAILURE ANALYSIS, 2023, 148
  • [23] The Effect of Plasma Nitriding on the Fatigue Behavior of the Ti-6Al-4V Alloy
    de Castro, Michele C. B.
    Couto, Antonio A.
    Almeida, Gisele F. C.
    Massi, Marcos
    de Lima, Nelson B.
    da Silva Sobrinho, Argemiro
    Castagnet, Mariano
    Xavier, Gleicy L.
    Oliveira, Rene R.
    MATERIALS, 2019, 12 (03)
  • [24] Electrochemical behavior of the Ti6Al4V alloy implanted by nitrogen PIII
    Savonov, G. S.
    Ueda, M.
    Oliveira, R. M.
    Otani, C.
    SURFACE & COATINGS TECHNOLOGY, 2011, 206 (07) : 2017 - 2020
  • [25] High cycle fatigue and fatigue crack propagation behaviors of β-annealed Ti-6Al-4V alloy
    Jeong D.
    Kwon Y.
    Goto M.
    Kim S.
    International Journal of Mechanical and Materials Engineering, 2017, 12 (1)
  • [26] Low cycle fatigue behavior of Ti6Al4V thermochemically nitrided for its use in hip prostheses
    Rodríguez, D
    Manero, JM
    Gil, FJ
    Planell, JA
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2001, 12 (10-12) : 935 - 937
  • [27] Low cycle fatigue behavior of Ti6Al4V thermochemically nitrided for its use in hip prostheses
    D. Rodríguez
    J. M. Manero
    F. J. Gil
    J. A. Planell
    Journal of Materials Science: Materials in Medicine, 2001, 12 : 935 - 937
  • [28] Impact of Morphology on the High Cycle Fatigue Behavior of Ti-6Al-4V for Aerospace
    Lee, Yoon-Seok
    Cho, Seungchan
    Ji, Changwook
    Jo, Ilguk
    Choi, Moonhee
    METALS, 2022, 12 (10)
  • [29] Initiation and Propagation of Short Fatigue Cracks in Forged Ti6Al4V
    Knobbe, Helge
    Koester, Philipp
    Christ, Hans-Juergen
    Fritzen, Claus-Peter
    Riedler, Martin
    FATIGUE 2010, 2010, 2 (01): : 931 - 940
  • [30] Dynamic Action of Mouthwashes Affects the Electrochemical Behavior of Ti6Al4V Alloy
    Sousa C.A.
    Cordeiro J.M.
    Silva A.O.
    Barão V.A.R.
    Faverani L.P.
    Assunção W.G.
    Journal of Bio- and Tribo-Corrosion, 2021, 7 (04)
12345