Impact of micro-grooves in scroll wrap tips on the performance of a trans-critical CO2 scroll compressor

Radial leakage was commonly regarded as the primary factor restricting the aero-thermodynamic per-formance of scroll compressors. In this paper, a passive flow control approach of micro-grooves in scroll wrap tip for the radial leakage in the scroll compressor was proposed, and its flow characteristics were numerically investigated. The impact of micro-grooves geometric parameters, such as groove number, depth, and partitions, on the flow control effect of the radial leakage was discussed, which was obtained by analyzing the evolution of the flow field and its influence on the performance of the scroll compres-sor. Results showed that the adoption of micro-grooves in scroll wrap tip yielded a significant limitation on the radial leakage, and geometrical parameters of the micro-grooves directly affected the flow control performance. Increasing groove numbers and partitions decreased the radial leakage effectively, while the leakage decreased first and then increased with the increase of the groove depth. The energy dissipation induced by the continuous throttling effect, jet expansion, and vortex in the groove cavity was the main flow control mechanism. The quadruple-grooves with the groove width of 0.5 mm and the groove depth of 100 mu m were adopted in this study eventually. The volumetric and isentropic efficiency of the scroll compressor raised up 2.1 and 1.0 percentage point compared to the original case, respectively. Through reasonable working conditions and micro-grooves geometry, the aero-thermodynamic performance of the oil-free scroll compressor could be improved effectively by the scroll wrap tip with micro-grooves. (C) 2021 Elsevier Ltd and IIR. All rights reserved.