Effects of Chemical Reaction Caused by Cooling Stream on Film Cooling Effectiveness

被引：0

作者：

Cheng, Keyong ^{[1
,2
]}

Liang, Shiqiang ^{[1
]}

Huai, Xiulan ^{[1
]}

Chen, Wei ^{[1
,2
]}

Guo, Yongxian ^{[1
,3
]}

机构：

[1] Chinese Acad Sci, Inst Engn Thermophys, Beijing 100190, Peoples R China

[2] Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China

[3] Xidian Univ, Sch Mechanoelect Engn, Xian 710071, Shaanxi, Peoples R China

来源：

JOURNAL OF THERMAL SCIENCE | 2012年 / 21卷 / 01期

基金：

中国国家自然科学基金;

关键词：

Gas turbine; Film cooling; Chemical reaction; Heat transfer; Numerical simulation; SIMULATION;

D O I：

10.1007/s11630-012-0519-4

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

With the increase of inlet temperature of gas turbines, the benefits by using the conventional methods are likely to approach their limits. Therefore, it is essential to study novel film cooling methods for surpassing these current limits. Based on the theory of heat transfer enhancement, a film cooling method with chemical reaction by cooling stream is proposed. In order to test the feasibility of the proposed method, numerical simulations have been conducted. The classic flat plate structure with a 30 degree hole is used for the simulation. In the present study, the effects of the parameters in relation to the chemical reaction on film cooling effectiveness, such as chemical heat sink, volume changes, and reaction rate, are investigated numerically. The conventional film cooling is also calculated for the comparison. The results show that film cooling effectiveness is improved obviously due to the chemical reaction, and the reaction heat and reaction rate of cooling stream have an important effect on film effectiveness. However, the effect of volume changes can be ignored.

引用

页码：60 / 65

页数：6

共 16 条

[1]

BOHN D, 2003, GT38369 ASME

[2] A review of shaped hole turbine film-cooling technology [J].

Bunker, RS .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2005, 127 (04) :441-453

[3] Influence of Near Hole Pressure Fluctuation on the Thermal Protection of a Film-Cooled Flat Plate [J].

Burdet, Andre ;

Abhari, Reza S. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2009, 131 (02) :1-11

[4]

DHUNGEL A, 2007, GT27419 ASME

[5]

ELY MJ, 2010, GT22060 ASME

[6] An experimental investigation of a new hybrid film cooling scheme [J].

Ghorab, M. G. ;

Hassan, I. G. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (21-22) :4994-5007

[7] Film cooling effectiveness and net heat flux reduction of advanced cooling schemes using thermochromic liquid crystal [J].

Ghorab, Mohamed G. .

APPLIED THERMAL ENGINEERING, 2011, 31 (01) :77-92

[8] Large-Eddy Simulation of double-row compound-angle film cooling: Setup and validation [J].

Graef, L. ;

Kleiser, L. .

COMPUTERS & FLUIDS, 2011, 43 (01) :58-67

[9] A novel concept for convective heat transfer enhancement [J].

Guo, ZY ;

Li, DY ;

Wang, BX .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (14) :2221-2225

[10]

HEIDMANN JD, 2007, GT27528 ASME

← 1 2 →