Influence of magnetic flux concentrator on the induction heating process in crystal growth systems-geometry investigation

被引：8
作者：
Heidari, Hamed [1 ]
Tavakoli, Mohammad Hossein [2 ]
Sobhani, Sayed Omid [1 ]
Honarmandnia, Mohtaram [2 ]
机构：
[1] TVU, Fac Shahid Yazdanpanah, Sanandaj Branch, Dept Math & Phys, Kurdistan, Iran
[2] Bu Ali Sina Univ, Dept Phys, Hamadan, Iran
来源：
CRYSTENGCOMM | 2018年 / 20卷 / 48期
关键词：
ACTIVE AFTERHEATER; RF COIL; SIMULATION; POSITION; FURNACE; DESIGN; SHAPE; FLOW;
D O I：
10.1039/c8ce00965a
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
In this paper, a magnetic flux concentrator (MFC) is reported, and its geometry effect on the induction heating process has been calculated in a Czochralski crystal growth system using the 2D finite element method. We have considered 8 cases; for the first case, the system has no magnetic flux concentrator. By solving Maxwell's equations, quantities such as distribution of electromagnetic fields as well as heat and its rate (in coil and crucible) have been computed. The results show that the presence of the magnetic flux concentrator and its different geometries has dramatic effect on the above mentioned parameters. The volumetric heat rate in the crucible bottom significantly increases possibly due to the presence of solidified melt. In addition to the crucible bottom with different MFC forms, the distribution and value of generated heat in the crucible wall change strongly.
引用
收藏
页码：7857 / 7865
页数：9
相关论文
共 36 条
  • [1] Numerical simulation of a thermo-electromagneto-hydrodynamic problem in an induction heating furnace
    Bermudez, A.
    Gomez, D.
    Muniz, M. C.
    Salgado, R.
    Vazquez, R.
    [J]. APPLIED NUMERICAL MATHEMATICS, 2009, 59 (09) : 2082 - 2104
  • [2] Modeling a working coil coupled with magnetic flux concentrators for barrel induction heating in an injection molding machine
    Bui, Huy-Tien
    Hwang, Sheng-Jye
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 86 : 16 - 30
  • [3] Numerical modeling in induction heating for axisymmetric geometries
    Chaboudez, C
    Clain, S
    Glardon, R
    Mari, D
    Rappaz, J
    Swierkosz, M
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (01) : 739 - 745
  • [4] Effects of induction heating on temperature distribution and growth rate in large-size SiC growth system
    Chen, QS
    Gao, P
    Hu, WR
    [J]. JOURNAL OF CRYSTAL GROWTH, 2004, 266 (1-3) : 320 - 326
  • [5] Optimization of the design of a crucible for a SiC sublimation growth system using a global model
    Chen, X. J.
    Liu, L. J.
    Tezuka, H.
    Usuki, Y.
    Kakimoto, K.
    [J]. JOURNAL OF CRYSTAL GROWTH, 2008, 310 (7-9) : 1810 - 1814
  • [6] Donea J., 1974, International Journal for Numerical Methods in Engineering, V8, P359, DOI 10.1002/nme.1620080213
  • [7] Influence of furnace design on the thermal stress during directional solidification of multicrystalline silicon
    Fang, H. S.
    Wang, S.
    Zhou, L.
    Zhou, N. G.
    Lin, M. H.
    [J]. JOURNAL OF CRYSTAL GROWTH, 2012, 346 (01) : 5 - 11
  • [8] ELECTROMAGNETIC MODELING OF INDUCTION MELTING DEVICES IN COLD CRUCIBLE
    GAGNOUD, A
    LECLERCQ, I
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 1988, 24 (01) : 573 - 575
  • [9] A FINITE-ELEMENT MODEL FOR INDUCTION-HEATING OF A METAL CRUCIBLE
    GRESHO, PM
    DERBY, JJ
    [J]. JOURNAL OF CRYSTAL GROWTH, 1987, 85 (1-2) : 40 - 48
  • [10] Global simulation of an RF Czochralski furnace during different stages of germanium single crystal growth, part II: to investigate the effect of the crucible's relative position against the RF coil on the isotherms, flow fields and thermo- elastic stresses
    Honarmandnia, M.
    Tavakoli, M. H.
    Sadeghi, H.
    [J]. CRYSTENGCOMM, 2017, 19 (03): : 576 - 583
1234