Optimization of Mechanical Properties in Magnesium Zinc Alloys

被引：1

作者：

Hale, Christopher ^{[1
]}

Xu, Zhigang ^{[1
]}

Zhang, HongLin ^{[1
]}

Yarmolenko, Sergey ^{[1
]}

Sankar, Jagannathan ^{[1
]}

机构：

[1] North Carolina A&T State Univ, Greensboro, NC 27411 USA

来源：

MAGNESIUM TECHNOLOGY 2021 | 2021年

关键词：

Magnesium alloys; Homogenization; Zinc; Mechanical properties; Hardness testing;

D O I：

10.1007/978-3-030-65528-0_25

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Magnesium-based alloys are being used today in various lightweight applications. The mechanical properties of magnesium-based alloys can be enhanced for such applications through a combination of annealing temperature and holding time of the magnesium-based alloy. The magnesium-based alloy under investigation in this study is Mg-5%Zn. The results of this investigation show that optimizing annealing time and temperature can achieve homogenization and enhance the mechanical properties and formability of Mg-5%Zn as seen in hardness test results for the homogenized samples.

引用

页码：173 / 177

页数：5

共 9 条

[1] Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
Agnew, SR
Duygulu, Ö
[J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2005, 21 (06) : 1161 - 1193
[2] Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys
Berge, F.
Krueger, L.
Ouaziz, H.
Ullrich, C.
[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (01) : 1 - 13
[3] Effect of heat treatment on strain hardening of ZK60 Mg alloy
Chen, Xianhua
Pan, Fusheng
Mao, Jianjun
Wang, Jingfeng
Zhang, Dingfei
Tang, Aitao
Peng, Jian
[J]. MATERIALS & DESIGN, 2011, 32 (03) : 1526 - 1530
[4] Fabrication of extraordinary high-strength magnesium alloy by hot extrusion
Homma, T.
Kunito, N.
Kamado, S.
[J]. SCRIPTA MATERIALIA, 2009, 61 (06) : 644 - 647
[5] Landkof B., 2006, Magnesium Alloys and their Applications, P168, DOI 10.1002/3527607552.ch28
[6] Mechanisms of creep deformation in Mg-Sc-based alloys
Mordike, BL
Stulíková, I
Smola, B
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (07): : 1729 - 1736
[7] Effect of equal channel angular pressing on AZ31 wrought magnesium alloys
Muralidhar, Avvari
Narendranath, S.
Nayaka, H. Shivananda
[J]. JOURNAL OF MAGNESIUM AND ALLOYS, 2013, 1 (04) : 336 - 340
[8] [杨文朋 Yang Wenpeng], 2010, [材料热处理学报, Transactions of Materials and Heat Treatment], V31, P95
[9] Formability enhancement in magnesium alloy deep drawing by local heating and cooling technique
Yoshihara, S
Yamamoto, H
Manabe, K
Nishimura, H
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 612 - 615

← 1 →