Plasma surface engineering for manmade soft materials: a review

被引:20
作者
Hegemann, Dirk [1 ]
Gaiser, Sandra [1 ]
机构
[1] Empa, Swiss Fed Labs Mat Sci & Technol, Adv Fibers Plasma & Coating Grp, St Gallen, Switzerland
基金
瑞士国家科学基金会;
关键词
soft matter; plasma treatment; crosslinking; surface functionalization; hydrogels; CHEMICAL-VAPOR-DEPOSITION; POLY(ETHYLENE GLYCOL); POLYMER-FILMS; BLOOD COMPATIBILITY; SENSITIVE HYDROGELS; CONTROLLED-RELEASE; SILICONE-RUBBER; CROSS-LINKING; ARGON PLASMA; COLD-PLASMA;
D O I
10.1088/1361-6463/ac4539
中图分类号
O59 [应用物理学];
学科分类号
摘要
Manmade soft materials are important in a wide range of technological applications and play a key role in the development of future technologies, mainly at the interface of synthetic and biological components. They include gels and hydrogels, elastomers, structural and packaging materials, micro and nanoparticles as well as biological materials. Soft materials can be distinguished from liquids owing to their defined shape and from hard materials by the deformability of their shape. This review article provides an overview of recent progress on the plasma engineering and processing of softer materials, especially in the area of synthesis, surface modification, etching, and deposition. The article aims to demonstrate the extensive range of plasma surface engineering as used to form, modify, and coat soft materials focusing on material properties and potential applications. In general, the plasma provides highly energetic, non-equilibrium conditions at material surfaces requiring to adjust the conditions for plasma-surface interaction to account for the specifics of soft matter, which holds independent of the used plasma source. Plasma-induced crosslinking and polymerization of liquids is discussed to transform them into gel-like materials as well as to modify the surface region of viscous liquids. A major field covers the plasma surface engineering of manmade soft materials with the help of gaseous reactive species yielding ablation, nanostructuring, functionalization, crosslinking, stiffening, and/or deposition to obtain demanded surface properties or adhesion to dissimilar materials. Finally, plasma engineering of rigid materials is considered to induce surface softening for the enhanced contact with tissues, to allow interaction in aqueous media, and to support bonding to soft matter. The potential and future perspectives of plasma engineering will be discussed in this review to contribute to a higher knowledge of plasma interaction with sensitive materials such as soft matter.
引用
收藏
页数:24
相关论文
共 213 条
  • [1] Hydrogel: Preparation, characterization, and applications: A review
    Ahmed, Enas M.
    [J]. JOURNAL OF ADVANCED RESEARCH, 2015, 6 (02) : 105 - 121
  • [2] Structure and orientation of water molecules at model hydrophobic surfaces with curvature: From graphene sheets to carbon nanotubes and fullerenes
    Alarcon, L. M.
    Malaspina, D. C.
    Schulz, E. P.
    Frechero, M. A.
    Appignanesi, G. A.
    [J]. CHEMICAL PHYSICS, 2011, 388 (1-3) : 47 - 56
  • [3] Controlled Ag release from electrically conductive coating systems
    Amberg, Martin
    Vandenbossche, Marianne
    Hegemann, Dirk
    [J]. SURFACE & COATINGS TECHNOLOGY, 2018, 336 : 29 - 33
  • [4] Controlling the release from silver electrodes by titanium adlayers for health monitoring
    Amberg, Martin
    Rupper, Patrick
    Storchenegger, Raphael
    Weder, Markus
    Hegemann, Dirk
    [J]. NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE, 2015, 11 (04) : 845 - 853
  • [5] [Anonymous], 1973, RUBBER CHEM TECHNOL, DOI DOI 10.5254/1.3542926
  • [6] [Anonymous], 2021, MAP DOCTORAL SCH 202
  • [7] The control of cargo release from physically crosslinked hydrogels by crosslink dynamics
    Appel, Eric A.
    Forster, Rebecca A.
    Rowland, Matthew J.
    Scherman, Oren A.
    [J]. BIOMATERIALS, 2014, 35 (37) : 9897 - 9903
  • [8] Plasma treatment of polymer powders - from laboratory research to industrial application
    Arpagaus, Cordin
    Oberbossel, Gina
    von Rohr, Philipp Rudolf
    [J]. PLASMA PROCESSES AND POLYMERS, 2018, 15 (12)
  • [9] Influence of the Polymer Glass Transition Temperature and Molecular Weight on Drug Amorphization Kinetics Using Ball Milling
    Asgreen, Camilla
    Knopp, Matthias Manne
    Skytte, Jeppe
    Lobmann, Korbinian
    [J]. PHARMACEUTICS, 2020, 12 (06)
  • [10] ION-INDUCED ETCHING OF ORGANIC POLYMERS IN ARGON AND OXYGEN RADIOFREQUENCY PLASMAS
    BAGGERMAN, JAG
    VISSER, RJ
    COLLART, EJH
    [J]. JOURNAL OF APPLIED PHYSICS, 1994, 75 (02) : 758 - 769