Building energy optimization using Grey Wolf Optimizer (GWO)

被引:100
作者
Ghalambaz, Mehdi [1 ]
Yengejeh, Reza Jalilzadeh [1 ]
Davami, Amir Hossein [2 ]
机构
[1] Islamic Azad Univ, Dept Environm Engn, Ahvaz Branch, Ahvaz, Iran
[2] Islamic Azad Univ, Dept Environm Management HSE, Ahvaz Branch, Ahvaz, Iran
关键词
Building minimum energy consumption; Building optimization problems (BOPs); Grey Wolf Optimizer (GWO); EnergyPlus; MULTIOBJECTIVE OPTIMIZATION; DESIGN; PERFORMANCE; ALGORITHMS; MODEL;
D O I
10.1016/j.csite.2021.101250
中图分类号
O414.1 [热力学];
学科分类号
摘要
In the present research, the Grey Wolf Optimizer (GWO) was used to minimize the yearly energy consumption of an office building in Seattle weather conditions. The GWO is a meta-heuristic optimization method, which was inspired by the hunting behavior of grey wolfs. The optimization method was coded and coupled with the EnergyPlus codes to perform the building optimization task. The impact of algorithm settings on the optimization performance of GWO was explored, and it was found that GWO could provide the best performance by using 40 wolfs. The optimized solutions of GWO were compared with other optimization algorithms in the literature, and it was found that the GWO could lead to an excellent optimum solution efficiently. One of the best optimization methods in the literature was Particle Swarm Optimization (PSO), which led to an optimum objective function of 133.5, while GWO resulted in the optimum value of 133. The multi-objective building optimization was also examined by GWO. The results showed that it could provide an excellent archive of non-dominant optimum solutions.
引用
收藏
页数:16
相关论文
共 54 条
[1]  
Al-Tashi Q, 2020, ALGO INTELL SY, P273, DOI 10.1007/978-981-32-9990-0_13
[2]   A review on simulation-based optimization methods applied to building performance analysis [J].
Anh-Tuan Nguyen ;
Reiter, Sigrid ;
Rigo, Philippe .
APPLIED ENERGY, 2014, 113 :1043-1058
[3]  
[Anonymous], 2005, P BUILDING SIMULATIO
[4]  
[Anonymous], 2003, Eighth Int. IBPSA Conf., Eindhoven
[5]   Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design [J].
Attia, Shady ;
Hamdy, Mohamed ;
O'Brien, William ;
Carlucci, Salvatore .
ENERGY AND BUILDINGS, 2013, 60 :110-124
[6]   Building energy optimization using surrogate model and active sampling [J].
Bamdad, Keivan ;
Cholette, Michael E. ;
Bell, John .
JOURNAL OF BUILDING PERFORMANCE SIMULATION, 2020, 13 (06) :760-776
[7]   Optimization methods applied to renewable and sustainable energy: A review [J].
Banos, R. ;
Manzano-Agugliaro, F. ;
Montoya, F. G. ;
Gil, C. ;
Alcayde, A. ;
Gomez, J. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2011, 15 (04) :1753-1766
[8]   Mechanical and thermal properties of lightweight recycled plastic aggregate concrete [J].
Basha, Shaik Inayath ;
Ali, M. R. ;
Al-Dulaijan, S. U. ;
Maslehuddin, M. .
JOURNAL OF BUILDING ENGINEERING, 2020, 32
[9]   Optimising the design of building envelopes for thermal performance [J].
Bouchlaghem, N .
AUTOMATION IN CONSTRUCTION, 2000, 10 (01) :101-112
[10]   Quantifying the performance advantage of using passive solar air heater with chimney for photovoltaic module cooling [J].
Chandavar, Arunachala Umesh .
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2021, 45 (02) :1576-1586