The Suitability of Using 3D PLA Printed Wedges for Ultrasonic Wave Propagation

被引：3
|
作者：
Balvantin, Antonio J. [1 ]
Rojas-Mancera, Erick [1 ]
Ramirez, Victor A. [1 ]
Angel Diosdado-De-La-Pena, Jose [1 ,2 ]
Alberto Limon-Leyva, Pablo [3 ]
Alfonso Figueroa-Diaz, Rafael [3 ]
机构：
[1] Univ Guanajuato, Dept Mech Engn, Salamanca 36885, Spain
[2] Youngstown State Univ, Coll Sci Technol Engn & Math, Youngstown, OH 44555 USA
[3] Inst Tecnol Sonora ITSON, Dept Elect & Elect Engn, Obregon 85130, Mexico
来源：
IEEE ACCESS | 2020年 / 8卷
关键词：
Layered manufacturing; acoustic waves; ultrasonic transducers;
D O I：
10.1109/ACCESS.2020.2967211
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This work studies the suitability of using 3D printed PLA wedges made through additive manufacturing to propagate Lamb waves in plate structures instead of using rather more expensive commercial wedges. Ultrasonic waves were propagated in test samples printed at different densities to determine the optimal printing features of ultrasonic wedges based on signal attenuation. Results show barely any difference in Lamb wave filtered effect between 3D printed PLA and commercial wedges, which supports its usage as a suitable and cheaper option for Lamb wave propagation.
引用
收藏
页码：15205 / 15209
页数：5
相关论文
共 50 条
  • [1] The Suitability of Using 3D PLa Printed Wedges for Ultrasonic Wave Propagation
    Balvantin a.J.
    Rojas-Mancera E.
    Ramirez V.a.
    Diosdado-De-La-Pena J.a.
    Limon-Leyva P.a.
    Figueroa-Diaz R.a.
    IEEE Access, 2020, 8 : 15205 - 15209
  • [2] Fabrication and Characterization of 3D Printed PLA
    Arora, Jassimran Kaur
    Bhati, Pooja
    PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, 2205
  • [3] ATHENA 3D: A finite element code for ultrasonic wave propagation
    Rose, C.
    Rupin, F.
    Fouquet, T.
    Chassignole, B.
    12TH ANGLO-FRENCH PHYSICAL ACOUSTICS CONFERENCE (AFPAC2013), 2014, 498
  • [4] FIRE BEHAVIOUR OF 3D PRINTED PLA AND WOOD/PLA COMPOSITES
    Kuzman, Manja Kitek
    Kariz, Mirko
    Ayrilmis, Nadir
    Sernek, Milan
    Zigon, Jure
    Xu, Qiang
    DIGITALISATION AND CIRCULAR ECONOMY: FORESTRY AND FORESTRY BASED INDUSTRY IMPLICATIONS, 2019, : 149 - 154
  • [5] Tensile Strength of 3D Printed PLA Part
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 103 - 114
  • [6] Behaviour of 3D printed PLA and PLA-PHA in marine environments
    Montalvao, G. R.
    Moshrefi-Torbati, M.
    Hamilton, A.
    Machado, R.
    Joao, A.
    2019 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENVIRONMENT RESEARCH, 2020, 424
  • [7] Damage detection in 3D printed plates using ultrasonic wave propagation supported with weighted root mean square calculation and wavefield curvature imaging
    Wojtczak, E.
    Ruck, M.
    Andrzejewska, A.
    XII INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS, EURODYN 2023, 2024, 2647
  • [8] THE EFFECT OF LAYER THICKNESS ON REPEATABILITY OF 3D PRINTED PLA PARTS PRODUCED USING OPENWARE 3D PRINTER
    Maideen, Normariah Che
    Rahim, Mohd Ikmal Hisham Abdul
    Budin, Salina
    Hyie, Mei
    Yusoff, Hamid
    IIUM ENGINEERING JOURNAL, 2022, 23 (02): : 218 - 227
  • [9] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Rajpurohit, Shilpesh R.
    Dave, Harshit K.
    PROGRESS IN ADDITIVE MANUFACTURING, 2021, 6 (01) : 119 - 131
  • [10] Impact strength of 3D printed PLA using open source FFF-based 3D printer
    Shilpesh R. Rajpurohit
    Harshit K. Dave
    Progress in Additive Manufacturing, 2021, 6 : 119 - 131
12345